Era FAVORITE 5C-01 [14/24] Pic 6 e neo

Era Storm YWF2E 200 [14/24] Pic 6 e neo
Рис.9 ERA
Pic.11 EURO
Pic.10 ERA Option -02
Pic.12 EURO Option -02
Pic. 8. E Option -02
Pic. 7. Option MRe
Pic. 6. E/NEO
1
2
1
2
E/NEO (pic. 6-8)
• remove the decorative front panel
• hold the power wire through the cable hole 1 in
the case
• strip the insulation on 5-7 mm from the wire end
• insert wires into terminal box X and press them by
tap screw
• fix the wires by means of cable clamp 2
• combine clamps of the decorative panel with grooves
in the case
• fix the panel with screw
ERA (pic. 9)
• remove the decorative front panel
• hold the power wire through the cable hole 1 in
the case
• strip the insulation on 5-7 mm from the wire end
• insert wires into terminal box X and press them by
tap screw
• fix the wires by means of cable clamp 2
• combine clamps of the decorative panel with
grooves in the case
• fix the panel with screw
ERA Option -02 (pic. 10)
• remove the decorative front panel
• install S3 switch to the fan case
• connect the wires by inserting the tip pins 3 to
the switch S3
• hold the power wire through the cable hole 1 in
the case
• strip the insulation on 5-7 mm from the wire end
• insert wires into terminal box X and press them
by tap screw
• fix the wires by means of cable clamp 2
• combine clamps of the decorative panel with
grooves in the case
• fix the panel with screw
EURO (pic. 11-12)
• remove the decorative front panel
• hold the power wire through the cable hole 1 in the case
• strip the insulation on 5-7 mm from the wire end
• insert wires into terminal box X and press them by tap screw
• fix the wires by means of cable clamp 2
• combine clamps of the decorative panel with grooves in the case
• fix the panel with screw
2
1
3
3
2
1
1 21 2
X
S3
1
3
3
2
Maintenance
• disconnect the fan from the mains;
• remove the fan by disconnecting it from the duct and removed from the installation
place.
• in case of heavy soiling, remove the fan impeller;
• wipe all plastic components with a soft cloth soaked in soapy water, it is not allowed
transfer of washing solution to the motor;
• wipe all surfaces dry;
• assemble a fan and set it in place.
Storage and transportation
Keep the fan only in the packaging of the manufacturer in a ventilated room at a
temperature of +5 ° C to +40 ° C and relative humidity of 80% (at T = 25 ° C). Keeping
time - 5 years from date of manufacture. Products transported by any transport provided
consumer protection or transport container from the direct eects of rainfall, lack of bias
transport places during transport, the lack of mutual physical impact during transportation
and preservation of fans. Transportation is carried out in force with the rules for this
transport.
Utilization
This appliance has a label in accordance with European Directive 2002/96/EC on waste
electrical and electronic appliances (waste electrical and electronic equipment - WEEE).
This order acts on rules on the territory throughout the EU and recycling of old appliances.
Service lifetime
Established service period - 5 years
Warranty
Fans are made by LLC «ERA» in accordance with applicable regulations and standards.
Manufacturer guarantees the normal operation of the fan for 5 years from the date of
sale in retail outlets subject to the rules of transportation, storage, installation, operation
and other requirements of this instruction. In case of absence of the date of sale, the
warranty period will be computed from the date of manufacture.
In case of finding failures in the work of the fan on the fault of manufacturer during
the warranty period the consumer has the right to replace the fan in the factory that is
the same serial numbers on the product and in the passport. An availability of branded
factory nameplate on the device is required! Please make sure it is available and store it
EN

Содержание

Скачать