Beretta RIELLO 7200.800 V PLUS Инструкция онлайн [12/20] 523677

INSTALLER

If suitable equipment is not on hand to lift the storage cylinder

off the pallet using the eyebolt, proceed as follows.

− Place a platform of about half the height of the pallet

near the storage cylinder. Make sure the platform is able

to support the weight of the storage cylinder.

− Remove the brackets (1) then carefully rotate and slide

the storage cylinder off the pallet on to the platform

− Make sure that the storage cylinder is perfectly stable,

and then remove the pallet

− Carefully rotate and slide the storage cylinder off the

platform on to the oor

− Remove the platform. Position the storage cylinder as

required.

Adjust the feet to ensure that the storage cylinder is perfectly

level.

Wear suitable personal protective equipment and use

suitable safety devices.

Do not dispose of packaging material into the environment,

or leave it within the reach of children, since it can become

a potential hazard. Dispose of packaging material in

compliance with applicable legislation.

MODELS 7200 V Plus 800 to 1000

Make sure that any lifting equipment is of adequate capacity to

lift and move the storage cylinder.

Remove the brackets (1) to free the storage cylinder.

To lift the storage cylinder, remove the plug (2), insulation (3) and

magnesium anode (4) and screw an eyebolt (Ø 1 ¼”) of suitable

capacity for the weight of the cylinder into the hole (5).