AXIOMET AX-6003P [2/10] Quick starting

• Do not use the instrument in an atmosphere which

contains sulfuric acid mist or other substances which

cause corrosion to metal.

• Do not use the instrument in a dusty place or a highly

humid place as such will cause instrument reliability

degradation and instrument failures.

• Install the instrument in a place where is free from

vibration.

• Install the instrument in a place where the ambient

temperature is in range of 10~70°C. Note that the

instrument operation may become unstable if it is

operated in an ambient temperature exceeding the range

of 0~40°C

2.3. Power Supply

AC Input voltage: 110V~120V/220~240V ±10%, 50/60Hz.

Connect the protective grounding conductor of the AC power

cord to an earth ground to avoid electrical shock.

2.4. Fuse

• Make sure the correct type of fuse is installed before

power up.

• Replace the AC fuse with the same type and rating as

the original fuse.

• Disconnect the power cord before fuse replacement.

• Make sure the cause of fuse blowout is fixed before

fuse replacement.

2.5. Cleaning

• Before cleaning, disconnect the AC mains.

• To clean the power supply, use a soft cloth dampened in

a solution of mild detergent and water. Do not spray

cleaner directly onto the instrument, since it may leak

into the cabinet and cause damage.

• Do not use chemicals containing benzene, benzene,

toluene, xylene, acetone, or similar solvents.

• Do not use abrasive cleaners on any portion of the

instrument.

2.6. Operation notes

EN 61010-1:2001 specifies the pollution degrees and their

requirements as follows. The instrument falls under degree

3. Quick Starting

3.1. Front Panel and Rear Panel

Front Panel