Candy GO 614 HTXT [54/73] Customer service
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Candy GO 614 HTXT [54/73] Customer service

Candy GO 614 HTXT [54/73] Customer service
Installation
After removing the machine from the packaging, proceed as
follows:
On the back of the machine
1) Unscrew the central screw (A); unscrew the 4 lateral
screws (B) and remove the cross piece (C).
2) Lean the machine forward and remove the plastic bags
containing the two polystyrene blocks at the sides,
pulling downwards.
3) Press the plug (to be found in the envelope with the
instructions) into the hole.
4) Fix the sheet of corrugated material on the
bottom as shown in picture.
5) Use the 4 feet to level the machine with the floor:
a) Turn the nut clockwise to release the screw adjuster of
the foot.
b) Rotate foot to raise or lower it until it stands firmly on the
ground.
c) Lock the foot in position by turning the nut anti-clockwise
until it comes up against the bottom of the machine.
107
Appliance complies with European Directive 89/336/EEC, 73/23/EEC and subsequent
amendments.
Technical data
■
Max. load of dry laundry
■
Water pressure
Measurements
■
Width
■
Depth
■
Height
NB: For specifications regarding electrical data, see the data panel on the front of the washing
machine (porthole area).
6 kg
(0,5 ÷ 10 bar)
0,05 ÷ 1 MPa
60 cm
54 cm
85 cm
Customer Service
The appliance is covered by a certificate of guarantee which allows you free use of the Candy
Technical Support Service. Remember to send off the guarantee certificate for validation
within 10 days of the date of purchase.
You should retain the receipt issued by the retailer when you purchased the machine to show
to the call out engineer, should you need to consult one.
If your washing machine shows signs of a defect or is not working properly, before you contact
GIAS Service we recommend you carry out the checks detailed on page 104 within the
Trouble shooting section.
If the problem with the machine persists after completing all the recommended checks, please
dial the GIAS Service number on the rear cover of this manual.
For the cost of a telephone call, you will be connected directly to GIAS. It is important you tell
the GIAS advisor your product’s model number and serial number, which you will find on the
rating label (16 characters, beginning with the number 3), found on the front of the washing
machine (door area). By doing this, your enquiry will be responded to more efficiently.
106
Fig. 2
A
B
C
Note: we recommend you keep the transverse bracket, braces and
screws to immobilise the machine for future transit. The Manufacturers
will not be responsible for any possible damage to the machine
caused by not following the rules relating to releasing the mechanism.
The user is responsible for all costs of installation.

Содержание

Похожие устройства

Customer Service Installation The appliance is covered by a certificate of guarantee which allows you free use of the Candy After removing the machine from the packaging proceed as Technical follows Support Service Remember to send off the guarantee certificate for validation within 10 days of the date of purchase On the back of the machine You should retain the receipt issued by the retailer when you purchased the machine to show 1 Unscrew the central screw A unscrew the 4 lateral to the call out engineer should you need to consult one screws B and remove the cross piece C If your washing machine shows signs of a defect or is not working properly before you contact GIAS Service we recommend you carry out the checks detailed on page 104 within the Trouble shooting section 2 Lean the machine forward and remove the plastic bags If the problem with the machine persists after completing all the recommended checks please containing dial the GIAS Service number on the rear cover of this manual pulling downwards the two polystyrene blocks at the sides For the cost of a telephone call you will be connected directly to GIAS It is important you tell the GIAS advisor your product s model number and serial number which you will find on the rating label 16 characters beginning with the number 3 found on the front of the washing machine door area By doing this your enquiry will be responded to more efficiently 3 Press the plug to be found in the envelope with the instructions into the hole 4 Fix the sheet of corrugated material on the bottom as shown in picture 5 Use the 4 feet to level the machine with the floor Technical data a Turn the nut clockwise to release the screw adjuster of the foot Max load of dry laundry Water pressure 6 kg 0 5 r 10 bar 05 v 1 MPa Measurements Width Depth Height 60 cm 54 cm 85 cm NB For specifications regarding electrical data see the data panel on the front of the washing machine porthole area Appliance complies with European Directive 89 336 EEC 73 23 EEC and subsequent amendments 106 b Rotate foot to raise or lower it until it stands firmly on the ground c Lock the foot in position by turning the nut anti clockwise until it comes up against the bottom of the machine Note we recommend you keep the transverse bracket braces and screws to immobilise the machine for future transit The Manufacturers will not be responsible for any possible damage to the machine caused by not following the rules relating to releasing the mechanism The user is responsible for all costs of installation 107

Скачать