Indesit WITXL 1051 [7/84] Q indesit
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Indesit WITXL 1051 [7/84] Q indesit

Indesit WITXL 1051 [7/84] Q indesit
7
GB
Fig. 1
Fig. 2
A) Opening (Fig. 1).
Lift the external lid and open it completely.
B) Then open the drum using both hands as
shown in Fig. 2:
- press the button indicated by the arrow in Fig. 2 lightly
downwards, with one hand firmly resting on the doors to
prevent them from suddenly opening and hurting your fingers;
- therefore follow the appliance doors along as these unhook
and open easily.
C) Loading the washing machine. (Fig. 3).
D) Shutting (Fig. 4).
- close the drum fully by first shutting the front door
followed by the rear one;
- then ensure the hooks on the front door are perfectly
housed within the seat of the rear door;
- after the hooks have clicked into position, press both
doors lightly downwards to make sure they do not
come loose;
- finally shut the external lid.
How to open and to close the drum
Fig. 3
Fig. 4
Cycle phase under way:
During the wash cycle, the LEDs gradually illuminate on
to indicate the cycle phase under way:
Prewash
Wash
Rinse
Spin cycle
Note: during draining, the LED corresponding to the Spin
cycle phase will be turned on.
Function buttons
The FUNCTION BUTTONS also act like LEDS.
When a function is selected, the corresponding button is
illuminated.
If the function selected is incompatible with the program-
me set, the button will flash and the function will not be
enabled.
If you set a function that is incompatible with another fun-
ction you selected previously, only the last one selected
will be enabled.
Leds
The LEDS provide important information.
This is what they can tell you:
Delay set:
If the Delay Timer function has been enabled (see page.
9), once you have started the programme, the LED corre-
sponding to the delay set will begin to flash:
As time passes, the remaining delay will be displayed,
and the corresponding LED will flash:
Once the set delay is complete, the flashing LED will turn
off and the programme set will start.

Содержание

Похожие устройства

Q inDesiT How to open and to close the drum GB A Opening Fig 1 Lift the external lid and open it completely B Then open the drum using both hands as shown in Fig 2 press the button indicated by the arrow in Fig 2 lightly downwards with one hand firmly resting on the doors to prevent them from suddenly opening and hurting your fingers therefore follow the appliance doors along as these unhook and open easily C Loading the washing machine Fig 3 D Shutting Fig 4 close the drum fully by first shutting the front door followed by the rear one then ensure the hooks on the front door are perfectly housed within the seat of the rear door after the hooks have clicked into position press both doors lightly downwards to make sure they do not come loose finally shut the external lid Fig 1 Fig 3 Cycle phase under way Leds The LEDS provide important information This is what they can tell you During the wash cycle the LEDs gradually illuminate on to indicate the cycle phase under way ÔC Delay set If the Delay Timer function has been enabled see page 9 once you have started the programme the LED corre sponding to the delay set will begin to flash io Prewash pS L OÎ Wash Rinse ft O 2h 6 Spin cycle 4h ft O 6h Note during draining the LED corresponding to the Spin cycle phase will be turned on O 9h Function buttons As time passes the remaining delay will be displayed and the corresponding LED will flash ft cS i 2h 111 0 O 4h A O 6h O 9h The FUNCTION BUTTONS also act like LEDS When a function is selected the corresponding button is illuminated If the function selected is incompatible with the program me set the button will flash and the function will not be enabled If you set a function that is incompatible with another fun ction you selected previously only the last one selected will be enabled Once the set delay is complete the flashing LED will turn off and the programme set will start 7

Скачать