Home
Главная
Electrolux
Стиральная Машина
EWF 1427
Руководство пользователя Страница: 21

Electrolux EWF 1427 [21/96] English

ENGLISH

• Remove any objects from the pump impeller by

rotating it.

• Put the cap back on the emergency emptying

hose and place the latter back in its seat.

• Screw the pump cover fully in.

• Close the pump door.

Water inlet filter

If you notice that the machine is taking longer to fill,

check that the filter in the water inlet hose is not

blocked.

Turn off the water tap.

Unscrew the hose from the tap.

Clean the filter with a stiff brush.

Screw the hose back onto the tap.

P1090

P1117

Emergency emptying out

If the water is not discharged, proceed as follows to

empty out the machine:

• pull out the plug from the power socket;

• close the water tap;

• if necessary, wait until the water has cooled down;

• open the pump door;

• place a bowl on the floor and place the end of the

emergency emptying hose into the bowl. Remove

its cap. The water should drain by gravity into the

bowl. Whe the bowl is full, put the cap back on the

hose. Empty the bowl. Repeat the procedure until

water stops flowing out;

• clean the pump if necessary as previously

described;

• replace the emergency emptying hose in its seat

after having plugged it;

• screw the pump cover again and close the door.

Frost precautions

If the machine is installed in a place where the

temperature could drop below 0°C, proceed as

follows:

• Remove the plug from the socket.

• Close the water tap and unscrew the water inlet

hose from the tap.

• Place the end of the emergency emptying hose

and that of the inlet hose in a bowl placed on the

floor and let water drain out.

• Turn the programme selector dial to O.

• Switch the machine OFF by depressing button .

• Screw the water inlet hose back on and reposition

the emergency emptying hose after having put the

cap on again.

By doing this, any water remaining in the machine is

removed, avoiding the formation of ice and,

consequently, breakage of the affected parts.

When you use the machine again, make sure that

the ambient temperature is above 0°C.

Important!

Every time you drain the water through the

emergency emptying hose you must pour 2 litres of

water into the main wash compartment of the

detergent drawer and then run the drain

programme. This will activate the ECO VALVE

device avoiding that part of the detergent remains

unused at next washing.

132982830 GB.qxd 02/03/2006 8.36 Pagina 21

Содержание

Похожие устройства

If the water is not discharged proceed as follows to empty out the machine pull out the plug from the power socket close the water tap if necessary wait until the water has cooled down open the pump door place a bowl on the floor and place the end of the emergency emptying hose into the bowl Remove its cap The water should drain by gravity into the bowl Whe the bowl is full put the cap back on the hose Empty the bowl Repeat the procedure until water stops flowing out Put the cap back on the emergency emptying hose and place the latter back in its seat clean the pump if necessary as previously described replace the emergency emptying hose in its seat after having plugged it screw the pump cover again and close the door Frost precautions Screw the pump cover fully in Close the pump door If the machine is installed in a place where the temperature could drop below 0 C proceed as follows Remove the plug from the socket Water inlet filter Close the water tap and unscrew the water inlet hose from the tap If you notice that the machine is taking longer to fill check that the filter in the water inlet hose is not blocked Turn off the water tap Place the end of the emergency emptying hose and that of the inlet hose in a bowl placed on the floor and let water drain out Unscrew the hose from the tap Turn the programme selector dial to O Clean the filter with a stiff brush Switch the machine OFF by depressing button Screw the hose back onto the tap Screw the water inlet hose back on and reposition the emergency emptying hose after having put the cap on again By doing this any water remaining in the machine is removed avoiding the formation of ice and consequently breakage of the affected parts When you use the machine again make sure that the ambient temperature is above 0 C Important Every time you drain the water through the emergency emptying hose you must pour 2 litres of water into the main wash compartment of the detergent drawer and then run the drain programme This will activate the ECO VALVE device avoiding that part of the detergent remains unused at next washing 21 ENGLISH Emergency emptying out Remove any objects from the pump impeller by rotating it

Скачать