Electrolux EWF 1427 [6/96] Assembly upon a stand kit

Electrolux EWF 1427 [6/96] Assembly upon a stand kit
6
The other end of the inlet hose which connects to
the machine can be turned in any direction. Simply
loosen the fitting, rotate the hose and retighten the
fitting, making sure there are no water leaks
The inlet hose must not be lengthened. If it is too
short and you do not wish to move the tap, you will
have to purchase a new, longer hose specially
designed for this type of use.
Water drainage
The end of the drain hose can be positioned in three
ways:
Hooked over the edge of a sink using the plastic
hose guide supplied with the machine. In this
case, make sure the end cannot come unhooked
when the machine is emptying.
This could be done by tying it to the tap with a piece
of string or attaching it to the wall.
In a sink drain pipe branch. This branch must be
above the trap so that the bend is at least 60 cm
above the ground.
Directly into a drain pipe at a height of not less
than 60 cm and not more than 90 cm.
The end of the drain hose must always be
ventilated, i.e. the inside diameter of the drain pipe
must be larger than the outside diameter of the drain
hose.
P0022
P0021
The drain hose must not be kinked.
For a correct functioning of the machine the
drain hose must remain hooked on the proper
support piece situated on the top part of the back
side of the appliance.
Electrical connection
This machine is designed to operate on a 220-230
V, single-phase, 50 Hz supply.
Check that your domestic electrical installation can
take the maximum load required (2.2 kW), also
taking into account any other appliances in use.
Connect the machine to an earthed socket.
The manufacturer declines any responsibility
for damage or injury through failure to comply
with the above safety precaution.
Should the appliance power supply cable
need to be replaced, this should be carried
out by our Service Centre.
Please ensure that when the appliance is
installed the power supply cable is easily
accessible.
Assembly upon a stand kit
Stand Dimension:
Height: 30 cm.
Width: 60 cm.
Depth: 60 cm.
This appliance can be installed upon a steel Stand
with Drawer to make the loading and unloading of
your laundry easier.
Please ask authorized dealer the suitable stand kit.
P1216
P1118
132982830 GB.qxd 02/03/2006 8.36 Pagina 6

Содержание

The other end of the inlet hose which connects to the machine can be turned in any direction Simply loosen the fitting rotate the hose and retighten the fitting making sure there are no water leaks The drain hose must not be kinked For a correct functioning of the machine the drain hose must remain hooked on the proper support piece situated on the top part of the back side of the appliance The inlet hose must not be lengthened If it is too short and you do not wish to move the tap you will have to purchase a new longer hose specially designed for this type of use Electrical connection This machine is designed to operate on a 220 230 V single phase 50 Hz supply Water drainage Check that your domestic electrical installation can take the maximum load required 2 2 kW also taking into account any other appliances in use The end of the drain hose can be positioned in three ways Hooked over the edge of a sink using the plastic hose guide supplied with the machine In this Connect the machine to an earthed socket case make sure the end cannot come unhooked when the machine is emptying This could be done by tying it to the tap with a piece of string or attaching it to the wall The manufacturer declines any responsibility for damage or injury through failure to comply with the above safety precaution Should the appliance power supply cable need to be replaced this should be carried out by our Service Centre A Please ensure that when the appliance is installed the power supply cable is easily accessible Assembly upon a stand kit In a sink drain pipe branch This branch must be above the trap so that the bend is at least 60 cm above the ground Stand Dimension Height 30 cm Width 60 cm Depth 60 cm Directly into a drain pipe at a height of not less than 60 cm and not more than 90 cm The end of the drain hose must always be ventilated i e the inside diameter of the drain pipe must be larger than the outside diameter of the drain hose This appliance can be installed upon a steel Stand with Drawer to make the loading and unloading of your laundry easier Please ask authorized dealer the suitable stand kit 6

Скачать