Planet WGSW-2840 [18/104] Disable command

copy config flash Copy system configuration parameters to flash

3.5.2.3 Disable command

Disable command is to exit the privileged mode and back to the first level of command line interface.

Command Description

Disable Disable privileged mode

3.5.2.4 Reboot command

Reboot command is to reboot the switch, please beware to check if the configuration is saved..

Command Description

Reboot Reboot system

3.5.2.5 Set command

Set command is to change the parameter of the switch functions. The follow table lists the set commands and the

equivalent usages.

Command Description

set channel Set ports to be channel

set default Set system load default parameters

set dot1x auth mode Set dot1x auth mode

set dot1x auth-ctrl disable Disable dot1x

set dot1x auth-ctrl enable Enable dot1x

set dot1x local-userInfo Set dot1x local user information

set dot1x max-req Max times of re-transmit EAP request to Supplicant

set dot1x quiet-period Quiet-period in secondst

set dot1x reauth-max

Max times of re-transmit Request/ID before port become

Unauthorized

set dot1x reauth-mode Enable or Disable reauthentication

set dot1x reauth-period Period for automatic re-authentication

set dot1x servertimeout Authentication server timeout

set dot1x supptimeout Timeout for supplicant

set dot1x tx-period Set dot1x server timeout

set enable password Set the password for the privileged level of the CLI

set igmp-snooping aging Set Multicast Group aging time

set igmp-snooping disable Disable igmp snooping

set igmp-snooping enable Enable igmp snooping

set igmp-snooping forward-all-leave Disable/Enable forward all-leave when fastleave is