![Biostar TA960 Версия 6.x [29/35] Ta960 bios manual](/img/pdf.png)
Biostar TA960 Версия 6.x [29/35] Ta960 bios manual
![Biostar TA960 Версия 6.x [29/35] Ta960 bios manual](/views2/1711015/page29/bg1d.png)
TA960 BIOS Manual
28
CPU/HT Reference Clock (MHz)
This item allows BIOS to select CPU Over Clock.
Options: 200 (Default) / 200~600
Custom P-States
This item tells BIOS whether to use the setup options below this to configure
the P-States, or whether to configure the P-States automatically.
Options: Disabled (Default) / Enabled
Note: The following items appear only when you set the Custom P-States item to [Enabled]
Core FID
This item allows you to select the Ratio/Frequency of AM3 CPU.
Options: x8.0 1600MHz ~ x131.5 6300MHz (Differed by CPU)
Core VID
This function allows you to adjust the voltage of AM3+ CPU.
Core DID
Options: Divided by 1 (Default) / Divided by 2 / Divided by 4 / Divided by
8 / Divided by 16
NB VID
Set the voltage to use for NB PState selected value is saved in the _PSS
object.
NB FID
This item allows you to select the Frequency of NB chip.
Options: 800MHz ~ 7000MHz (Differed by CPU)
NB DID
Options: Divided by 1 (Default) / Divided by 2
Link Speed
The HyperTransport link will run at this speed if it is slower than or equal to
the system clock and the board is capable.
Options: Auto (Default) / 200MHz / 400MHz / 600MHz / 800MHz / 1GHz /
1.2GHz / 1.4GHz / 1.6GHz / 1.8GHz / 2.0GHz / 2.2GHz / 2.4GHz /
2.6GHz /2.8GHz /3.0GHz
Link Width
The HyperTransport link will run at this width.
Options: Auto (Default) / 8 Bit / 16 Bit
Содержание
- Ta960 bios manual 1
- Acpi support 2
- Apm support 2
- Bios setup 2
- Epa green pc support 2
- Introduction 2
- Plug and play support 2
- Ta960 bios manual 2
- Dram support 3
- Notice 3
- Pci bus support 3
- Supported cpus 3
- Ta960 bios manual 3
- Using setup 3
- Ami bios 4
- Main menu 4
- Once you enter ami bios setup utility the main menu will appear on the screen providing an overview of the basic system information 4
- Set the system date note that the day automatically changes when you set the date 4
- Set the system internal clock 4
- Shows system information including bios version and built date 4
- Shows system memory size vga shard memory will be excluded 4
- System date 4
- System memory 4
- System time 4
- Ta960 bios manual 4
- Primary ide master slave sata1 6 5
- Sata configuration 5
- Ta960 bios manual 5
- The bios detects the information and values of respective devices and these information and values are shown below to the name of the sub menu 5
- To enter the sub menu of detailed options 5
- Ta960 bios manual 6
- Advanced menu 7
- Beware of that setting inappropriate values in items of this menu may cause system to malfunction 7
- Cpu configuration 7
- Notice 7
- Ta960 bios manual 7
- The advanced menu allows you to configure the settings of cpu super i o power management and other system devices 7
- This item shows the cpu information that the bios automatically detects 7
- Ta960 bios manual 8
- Superio configuration 9
- Ta960 bios manual 9
- Ta960 bios manual 10
- Smart fan configuration 11
- Ta960 bios manual 11
- Hardware health configuration 12
- Ta960 bios manual 12
- Acpi apic support this item is used to enable or disable the motherboard s apic advanced programmable interrupt controller the apic provides multiprocessor support more irqs and faster interrupt handling options enabled default disabled 13
- Acpi version features the item allows you to select the version of acpi options acpi v1 default acpi v2 acpi v3 13
- Ami oemb table set this value to allow the acpi bios to add a pointer to an oemb table in the root system description table rsdt table options enabled default disabled 13
- Eup control this item is used to enable or disable eup control energy using products options disabled default enabled 13
- Power configuration 13
- Suspend mode select the acpi state used for system suspend options s1 pos default s3 str auto 13
- Ta960 bios manual 13
- Ta960 bios manual 14
- Bios ehci hand off this item allows you to enable support for operating systems without an ehci hand off feature options enabled default disabled 15
- Legacy usb support this item determines if the bios should provide legacy support for usb devices like the keyboard mouse and usb drive this is a useful feature when using such usb devices with operating systems that do not natively support usb e g microsoft dos or windows nt options enabled default disabled auto 15
- Ta960 bios manual 15
- This item shows the usb controller and using usb device information 15
- Usb 2 controller mode this item allows you to select the operation mode of the usb 2 controller options hispeed default usb 2 480mbps fullspeed usb 1 12mbps 15
- Usb configuration 15
- Beware of that setting inappropriate values in items of this menu may cause system to malfunction 16
- Clear nvram 16
- Notice 16
- Pci pnp menu 16
- Plug play os 16
- Ta960 bios manual 16
- This item allows you to clear the data in the nvram cmos by selecting yes options no default yes 16
- This section describes configuring the pci bus system pci or personal computer interconnect is a system which allows i o devices to operate at speeds nearing the speed of the cpu itself uses when communicating with its own special components 16
- When set to yes bios will only initialize the pnp cards used for the boot sequence vga ide scsi the rest of the cards will be initialized by the pnp operating system like window 95 when set to no bios will initialize all the pnp cards for non pnp operating systems dos netware this option must set to no options no default yes 16
- Allocate irq to pci vga 17
- Palette snooping 17
- Pci ide busmaster 17
- Pci latency timer 17
- Pci resource 17
- Some old graphic controllers need to snoop on the vga palette and then map it to their display as a way to provide boot information and vga compatibility this item allows such snooping to take place options disabled default enabled 17
- Ta960 bios manual 17
- This item allows bios to choose a irq to assign for the pci vga card options yes default no 17
- This item controls how long a pci device can hold the pci bus before another takes over the longer the latency the longer the pci device can retain control of the bus before handing it over to another pci device options 64 default 32 96 128 160 192 224 248 17
- This item is a toggle for the built in driver that allows the onboard ide controller to perform dma direct memory access transfers options enabled default disabled 17
- Pci express configuration 18
- Ta960 bios manual 18
- Boot device priority 19
- Boot menu 19
- Hard disk drives 19
- Items in this sub menu specify the boot device priority sequence from the available devices the number of device items that appears on the screen depends on the number of devices installed in the system options removable hard disk cdrom legacy lan disabled 19
- Removable drives 19
- Ta960 bios manual 19
- The bios will attempt to arrange the hard disk boot sequence automatically you can also change the booting sequence the number of device items that appears on the screen depends on the number of devices installed in the system options pri master pri slave sec master sec slave usb hdd0 usb hdd1 usb hdd2 bootable add in cards 19
- The bios will attempt to arrange the removable drive boot sequence automatically you can also change the booting sequence the number of device items that appears on the screen depends on the number of devices installed in the system options floppy disks zip100 usb fdd0 usb fdd1 usb zip0 usb zip1 ls120 19
- This menu allows you to setup the system boot options 19
- Addon rom display mode 20
- Boot success beep 20
- Bootup num lock 20
- Cd dvd drives 20
- Full screen logo show 20
- Ignore memory error messages 20
- Interrupt 19 capture 20
- Quick boot 20
- Ta960 bios manual 20
- Chipset menu 21
- Southbridge configuration 21
- Ta960 bios manual 21
- This submenu allows you to configure the specific features of the chipset installed on your system this chipset manage bus speeds and access to system memory resources such as dram it also coordinates communications with the pci bus 21
- Ec configuration 22
- Hd audio azalia device this item allows you to control the hd audio device options enabled default auto disabled azalia clock gating options disabled default enabled 22
- Sb azalia audio configuration 22
- Ta960 bios manual 22
- Ta960 bios manual 23
- Internal graphics 24
- Internal graphics mode this item allows you to select the memory mode used for internal graphics device options uma default disable uma frame buffer size this item allows you to choose the uma frame buffer size for internal graphics options auto default 32mb 64mb 128mb 256mb 512mb 24
- Northbridge configuration 24
- Ta960 bios manual 24
- Fb location this item allows you to set the fb dimm location options above 4g default under 4g 25
- Gen2 high speed mode options auto default disabled software initiated advertised rc 25
- Gpp slots power limit w options 25 default 0 255 port 02 features 25
- Pci express configuration 25
- Ta960 bios manual 25
- Ta960 bios manual 26
- Mac id information this item shows the mac id 27
- Onboard peripherals 27
- Realtek option rom this item allows you to enable or disable the onboard lan boot rom options disabled default enabled 27
- Realtek pcie nic this option allows you to control the onboard lan controller options enable default disable 27
- Ta960 bios manual 27
- Beware of that setting inappropriate values in items of this menu may cause system to malfunction 28
- Cpu tuning 28
- Notice 28
- Performance menu 28
- Ta960 bios manual 28
- This submenu allows you to change voltage and clock of various devices however we suggest you use the default setting changing the voltage and clock improperly may damage the device 28
- Ta960 bios manual 29
- Clock control 30
- Ta960 bios manual 30
- Cpu nb over voltage this item allows you to change cpu nb voltage value 31
- Cpu over voltage this item allows you to change cpu voltage value 31
- Gfx engine clock this item allows you to set the internal gfx engine clock options 350 default min 150 max 1000 31
- Memory over voltage this item allows you to change memory voltage value 31
- Ta960 bios manual 31
- Voltage configuration 31
- Dram timing configuration 32
- Ta960 bios manual 32
- Memory configuration 33
- Ta960 bios manual 33
- Abandon all changes made during the current session and exit setup 34
- Abandon all changes made during the current session and restore the previously saved values 34
- Discard changes 34
- Discard changes and exit 34
- Exit menu 34
- Load optimal defaults 34
- Save all configuration changes to cmos ram and exit setup 34
- Save changes and exit 34
- Ta960 bios manual 34
- This menu allows you to load the optimal default settings and save or discard the changes to the bios items 34
- This selection allows you to reload the bios when problem occurs during system booting sequence these configurations are factory settings optimized for this system 34
- Security 35
- Ta960 bios manual 35
Похожие устройства
- Biostar TA960 Версия 6.x Инструкция
- Biostar A880GZ Версия 6.x Инструкция BIOS
- Biostar A880GZ Версия 6.x Инструкция
- Biostar A960D+V2 Версия 6.x Инструкция BIOS
- Biostar A960D+V2 Версия 6.x Инструкция
- Biostar A960A3+ Версия 6.x Инструкция BIOS
- Biostar A960A3+ Версия 6.x Инструкция
- Biostar TA970XE Версия 5.x Инструкция
- Biostar TA970XE Версия 5.x Инструкция BIOS
- Biostar TA970 Версия 5.3 Инструкция BIOS
- Biostar TA970 Версия 5.3 Инструкция
- Biostar TA970 Plus Версия 5.x Инструкция BIOS
- Biostar TA970 Plus Версия 5.x Инструкция
- Biostar TA990FXE Версия 5.x Инструкция BIOS
- Biostar TA990FXE Версия 5.x Инструкция
- Scarlett SC-MC410S18 Книга рецептов
- Daikin REYQ12MY1B Сервис мануал
- Daikin REYQ14MY1B Руководство по эксплуатации
- Daikin REYQ14MY1B Руководство по вводу в эксплуатацию
- Daikin REYQ14MY1B Технические данные