Planet VC-202 [28/32] Troubleshooting

5. Troubleshooting

SYMPTOM:

VDSL LNK LED does not lit after wire is connected to the

VDSL port.

CHECKPOINT:

1. Verify the length of the wire connected between two VC-

201 is not more than 1.5km. Please also try to adjust the

DIP switch or VC-201 to other SNR mode.

2. Please note you must use one VC-201 with CO mode and

the other VC-201 with CPE mode, connect to each other

to make it work.

SYMPTOM:

TP LNK/ACT LED does not lit after cable is connected to the

port.

CHECKPOINT:

1. Verify you are using the Cat.5 or better cable with RJ-45

connector to connect to the port.

2. If your device (like LAN card) supports to Auto-Negotia

tion, please try to manual set at a xed speed of your

device to solve this problem.

3. The converter and the connected device’s power are on or

not.

4. The port’s cable is rmly seated in its connectors in the

switch and in the associated device.