Home
Главная
Planet
Роутеры
WAP-6000
Инструкция по эксплуатации Страница: 22

Planet WAP-6000 Инструкция по эксплуатации онлайн [22/33] 65831

- -

Transmit power You can reduce RF output power by selecting Half (-3dB) / Quarter

(-6dB) / Eighth (-9dB) / Minimum. To change transmit power may

decrease your wireless signal coverage.

Beacon interval

(20-1000)

This value indicates the frequency interval of the beacon. A beacon

is a packet broadcast by the WAP-6000 to keep the network

synchronized. A beacon includes the wireless LAN service area, the

AP address, the Broadcast destination address, a time stamp,

Delivery Traffic Indicator Maps, and the Traffic Indicator Message

(TIM).

Data beacon rate

(DTIM) (1-255)

Enter a value between 1 and 255 that specifies the Delivery Traffic

Indication Message (DTIM). A DTIM is a countdown informing clients

of the next window for listening to broadcast and multicast

messages. When the AP has buffered broadcast or multicast

messages for associated clients, it sends the next DTIM with a DTIM

Interval value. AP Clients hear the beacons and awaken to receive

the broadcast and multicast messages.

Fragment length

(256-2346)

This specifies the maximum size of a data packet. It should remain at

its default setting of 2,346. A smaller setting means smaller packets,

which will create more packets for each transmission. If you have

decreased this value and experience high packet error rates, you

can increase it again, but it will likely decrease overall network

performance. Only minor modifications of this value are

recommended.

RTS/CTS threshold

(256-2346)

Enter the preferred setting between 256 and 2346. Normally, this can

be left at the default value.

Short preamble Preambles are a sequence of binary bits that help the receivers

synchronize and ready for receipt of a data transmission. Some older

wireless systems like 802.11b implementation use shorter

preambles. If you are having difficulty connecting to an older 802.11b

device, try to enable short preamble.

Protection mode Protection Mode should remain default value (Auto) unless you are

having severe problems with your 11g Wireless LAN products not

being able to transmit to the WAP-6000 in an environment with

heavy 802.11b traffic. To enable this function boosts the WAP-6000’s

ability to catch all 11g Wireless transmissions but will severely

decrease performance.

After all changes are made, be sure to click on “Apply” to make sure all changes are saved into system.

Planet WAP-6000 Инструкция по эксплуатации онлайн [22/33] 65831

Содержание

Похожие устройства