Planet IAD-200W Инструкция по эксплуатации онлайн [24/111] 66109

Planet IAD-200 Инструкция по эксплуатации онлайн [24/111] 66106
SSID
This is also called the "Network Name". Enter the desired value. The
default value is Wireless.
If using an ESS (Extended Service Set, with multiple access
points) this ID is called an ESSID (Extended Service Set Identi-
fier).
To communicate, all Wireless stations use the same SSID/ESSID,
so must match the value entered here.
Options
Mode
Select the desired mode:
802.11G-plus (TI) This allows clients to use any of the following
modes:
Standard 802.11b
802.11B+ (Texas Instruments proprietary enhanced mode)
Standard 802.11g
802.11G-plus (Texas Instruments proprietary enhanced
mode). This mode can increase throughput by up to 50%, but
will only work between compatible TI wireless stations.
802.11g & 802.11b - Both 802.11.g and 802.11b Wireless stations
will be able to use the IAD-200W.
802.11g only - Only 802.11g Wireless stations can use the IAD-
200W.
802.11b only - Only 802.11b connections are available. 802.11g
Wireless Stations will only be able to use the IAD-200W if they
are fully backward-compatible with the 802.11b standard.
Channel No.
Select the Channel you wish to use on your Wireless LAN.
If you experience interference (shown by lost connections and/or
slow data transfers) you may need to experiment with different
channels to see which is the best.
If using multiple Access Points, adjacent Access Points should use
different Channels to reduce interference.
Broadcast SSID
If enabled, the IAD-200W will broadcast its SSID. This allows PCs
and other wireless stations to detect this Access Point and use the
correct SSID.
If disabled, PC users will have to manually enter the SSID and other
details of the wireless interface before they can connect to this Access
Point.
Wireless Security
Current Setting
The current Wireless security is displayed. The default value is Dis-
abled.
Configure
Button
Click this button to access the Wireless security sub-screen, and view
or change the settings. See the following section for details.
Access Point
Enable Wireless
Access Point
Enable this if you want to use Wireless Access Point function.
If disabled, no Wireless stations can use the Access Point function, and
all connections must be made via the wired LAN.
18

Содержание

Скачать