Daikin RXYMQ36MVJU [12/19] On off timer operation

ON/OFF TIMER Operation

•

The timer is operated by the following two ways.

Programming the stop time ( )........ The system stops operating after the time setting has elapsed.

Programming the start time ( ) ......... The system starts operating after the time setting has elapsed.

• The timer can be programmed for a maximum of 72 hours.

• The start and the stop time can simultaneously be programmed.

Press the TIMER MODE START/STOP button several times and select the mode on the display.

The display flashes.

For setting the timer stop...“ ”

For setting the timer start...“ ”

Press the PROGRAMMING TIME button and set the time for stopping or starting the system.

When this button is pressed, the time advances by 1 hour.

When this button is pressed, the time goes backward by 1 hour.

Press the TIMER ON/OFF button.

The timer setting procedure ends. The display “ or ” changes from flashing light to a constant light.

TEST

NOTE:

• When setting the timer Off and On at the same time, repeat the above procedure (from 1 to 3) once again.

• After the timer is programmed, the display shows the remaining time.

• Press the TIMER ON/OFF button once again to cancel programming. The display vanishes.

For example:

When the timer is programmed to stop the system after 3 hours and start the system after 4 hours,

the system will stop after 3 hours and then 1 hour later the system will start.

01_EN_3PN00286-12Z.fm Page 11 Wednesday, September 14, 2005 8:56 PM