Icom IC-F4011 [17/48] D for ic f3013 ic f4013 only

PANEL DESCRIPTION

MONITOR KEY

➥

Push to mute and release the CTCSS (DTCS) or 2Tone* squelch

mute. Open any squelches/deactivate any mutes while pushing

this key. (LMR operation only)

* Available for the IC-F3013/F4013 only.

➥ Activates one of (or two of) the following functions on each chan-

nel independently: (PMR operation only)

• Push and hold to un-mute the channel (audio is emitted; ‘Audible’).

• Push to mute the channel (audio is not emitted; ‘Inaudible’).

• Push to send a ‘reset code’ after the communication is ﬁnished.

NOTE: The un-mute condition (‘Audible’ condition) may auto-

matically return to the mute condition (‘Inaudible’ condition)

after a speciﬁed period.

D For IC-F3013/IC-F4013 only

DTMF AUTODIAL KEY

Push to transmit the programmed DTMF code.

CALL KEYS

Push to transmit a 2/5-tone code.

• Call transmission is necessary before you call another station depend-

ing on your signalling system.

• [Call A] and/or [Call B] keys may be available when your system em-

ploys selective ‘Individual/Group’ calls. Ask your dealer which call is

assigned to each key.

EMERGENCY SINGLE/EMERGENCY REPEAT KEYS

➥

Push and hold for the speciﬁed time period to transmit an emer-

gency call once or repeatedly.

➥

When [Emergency Single (Silent)] or [Emergency Repeat (Silent)]

is pushed, an emergency call is transmitted with no beep emission.

• If you want to cancel the emergency call, push (or push and hold)

the key again before transmitting the call.

• The emergency call is transmitted one time only or repeatedly until

receiving a control code depending on the pre-setting.