![Icom IC-PCR100 [3/44] Cautions](/img/pdf.png)
Icom IC-PCR100 [3/44] Cautions
![Icom IC-PCR100 [3/44] Cautions](/views2/1074683/page3/bg3.png)
CAUTIONS
RWARNING! NEVER connect the receiver to an AC
outlet. This may pose a fire hazard or result in an electric
shock.
NEVER connect other than the specified AC adapter to the
receiver. This connection will ruin the receiver.
NEVER connect the receiver to a power source of more
than 16 V DC such as a 24 V battery. This connection will ruin
the receiver.
NEVER expose the receiver to rain, snow or any liquids.
DO NOT use or place the receiver in areas with tempera-
tures below 0°C (+32°F) or above +50°C (+122°F) or, in areas
subject to direct sunlight.
AVOID placing the receiver in excessively dusty environ-
ments.
AVOID the use of chemical agents such as benzine or al-
cohol when cleaning, as they damage the receiver surfaces.
Place unit in a secure place to avoid inadvertent use by children.
For U.S.A. only (FCC information)
CAUTION: Changes or modifications not expressly ap-
proved by Icom Inc. could void the user’s authority to operate
this receiver.
Class B digital device users
This equipment has been tested and found to comply with the limits
for Class B digital devices, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment gen-
erates, uses and can radiate radio frequency energy and, if not in-
stalled and used in accordance with the instruction manual, may
cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installa-
tion. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equip-
ment off and on, the user is encouraged to try to correct the interfer-
ence by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
For Canada only
Operation is subject to the following two conditions: (1) this device
may not cause interference, and (2) this device must accept any in-
terference, including interference that may cause undesired opera-
tion of the device.
ii
IBM is registered trademark of International Business Machines Corporation in
the U.S.A. and other countries. Microsoft
®
and Windows
®
are registered trade-
marks of Microsoft Corporation in the U.S.A and other countries. Screen shots
produced with permission from Microsoft Corporation. All other products or
brands are registered trademarks or trademarks of their respective holders.
Содержание
- Communications receiver for computer 1
- Instruction manual 1
- Ipcr100 1
- Important 2
- Operating notes 2
- Operating theory 2
- Read all instruction 2
- Save this instruction manual 2
- System requirements 2
- Caution 3
- Cautions 3
- For canada only 3
- For u s a only fcc information 3
- R warning neve 3
- Table of contents 4
- I hardware installation 5
- Installation 5
- Caution 6
- I antenna installation 6
- I grounding 6
- Installation 6
- R warning neve 6
- Caution 7
- D multi function receiver screen 7
- D simple function receiver screen 7
- I af output level selection 7
- Installation 7
- D installation 8
- D software update information 8
- I software installation 8
- Installation 8
- D multi function receiver screen 9
- D setting the button configuration 9
- D simple function receiver screen 9
- I mouse property setting 9
- I rs 232c port setting 9
- Installation 9
- Multi function receiver screen 10
- Panel description 10
- Panel description 11
- Panel description 12
- Panel description 13
- I function display 14
- Panel description 14
- Panel description 15
- I simple function receiver screen 16
- Panel description 16
- Panel description 17
- I function controller screen 18
- Panel description 18
- I simple function receiver sub screens 19
- Panel description 19
- Basic operation 20
- D using the multi function receiver screen 20
- D using the simple function receiver screen 20
- I receiving 20
- Basic operation 21
- Click the desired numeral buttons then click ent to set the frequency 21
- Click the tuning dial with the sub mouse button to increase the frequency click the tuning dial with the main mouse button to decrease the frequency 21
- D using the keypad 21
- D using the pc keyboard 21
- D using the simple function receiver screen 21
- D using the tuning dial 21
- Depending on the situation the receive frequency can be set using the following methods frequencies can be set from 0 1000 to 1300 0000 mhz 21
- I setting a frequency 21
- Push the desired numeral keys then push enter to set the frequency 21
- Q click menu and select the function controller when it is not displayed w click freq j or freq k on the function controller to set the frequency according to the selected tuning step 21
- Basic operation 22
- D using the multi function receiver screen 22
- D using the simple function receiver screen 22
- I receive mode selection 22
- I setting a tuning step 22
- Basic operation 23
- D setting the automatic mode function 23
- I automatic mode selection 23
- Basic operation 24
- D using the multi function receiver screen 24
- D using the simple function receiver screen 24
- I if filter selection 24
- I setting squelch level 24
- Basic operation 25
- D using the multi function receiver screen 25
- D using the simple function receiver screen 25
- I attenuator function 25
- I automatic noise limiter 25
- D memory channel contents 26
- D using the multi function receiver screen 26
- D using the simple function receiver screen 26
- I general 26
- I saving memory channels 26
- Memory channels 26
- D using the mch button on the multi function receiver screen 27
- D using the memory list screen 27
- D using the simple function receiver screen 27
- D using the up down button on the multi function receiver screen 27
- I selecting a memory channel 27
- Memory channels 27
- I clearing a 28
- Memory channel 28
- Memory channel programming 28
- D editing a bank name 29
- D inserting and deleting channels 29
- I editing the memory list 29
- Memory channels 29
- I scan types 30
- Scan operation 30
- D using the multi function receiver screen 31
- D using the simple function receiver screen 31
- I programmed scan 31
- Scan operation 31
- I setting scan edges 32
- Scan operation 32
- D using the multi function receiver screen 33
- D using the simple function receiver screen 33
- I auto memory write scan 33
- Scan operation 33
- D using the multi function receiver screen 34
- I memory scan 34
- Scan operation 34
- I versatile memory scan 35
- Scan operation 35
- I scan resume condition 36
- Scan operation 36
- D using the multi function receiver screen 37
- D using the simple function receiver screen 37
- I scan speed setting 37
- Scan operation 37
- Band scope 38
- D using the multi function receiver screen 38
- D using the simple function receiver screen 38
- I operation 38
- Band scope 39
- D about the limit indicator 39
- I changing the automatic sweep step limit 39
- Available tone squelch frequencies unit hz 40
- D using the multi function receiver screen 40
- D using the simple function receiver screen 40
- E click the button then select the desired tone squelch frequency 40
- E click the tsql button to bring up the tone squelch dialog box 40
- Q click menu and select the function controller when it is not displayed w click the fm button in the function controller screen to se lect fm mode 40
- Q click the fm button to select fm mode w click the t sql button to bring up the tone squelch dialog box 40
- R click the button then select the desired tone squelch frequency 40
- R click the close button to close the tone squelch dialog box t when the received signal includes a matching tone squelch opens and the signal can be heard 40
- T click the close button to close the tone squelch dialog box y when the received signal includes a matching tone squelch opens and the signal can be heard 40
- The tone squelch opens only when receiving a signal con taining a matching subaudible tone in fm mode for exam ple you can silently wait for calls from group members using the same tone in an amateur band 40
- Tone squelch operation 40
- U click the tsql button to cancel the tone squelch 40
- Y click the t sql button to cancel the tone squelch 40
- If your receiver seems to be malfunctioning please check the following points before sending it to a service center 41
- Problem possible cause solution ref 41
- Troubleshooting 41
- I specifications 42
- Specifications and supplied accessories 42
- I supplied accessories 43
- Specifications and supplied accessories 43
- 9 16 kamihigashi hirano ku osaka 547 0002 japan 44
- Count on us 44
Похожие устройства
- Asko C9510 A42002003 RU WHITE FS 50 Инструкция по эксплуатации
- Siemens KG39EAW20R Инструкция по эксплуатации
- Icom IC-PCR1000 Инструкция по эксплуатации
- Asko C9535 A42002022 RU WHITE FS 50 Инструкция по эксплуатации
- Siemens KG36EAL20R Инструкция по эксплуатации
- Icom IC-R1500 Инструкция по эксплуатации
- Bosch KGE36AI20R Инструкция по эксплуатации
- Asko C9540 A42002017 RU WHITE FS 50 Инструкция по эксплуатации
- Icom IC-PCR1500 Инструкция по эксплуатации
- Bosch KGE39AW30R Инструкция по эксплуатации
- Asko C9545 A42002025 RU WHITE FS 50 Инструкция по эксплуатации
- Icom IC-PCR2500 Инструкция по эксплуатации
- Siemens KG39EAL20R Инструкция по эксплуатации
- Asko C955 A527C52A RU WHITE FS 50 Инструкция по эксплуатации
- Icom IC-R2 Инструкция по эксплуатации
- Siemens KG39EAW30R Инструкция по эксплуатации
- Asko C9555 A42002023 RU WHITE FS 50 Инструкция по эксплуатации
- Icom IC-R2500 Инструкция по эксплуатации
- Bosch KGE39AI20R Инструкция по эксплуатации
- Asko C9560 A42002018 RU WHITE FS 50 Инструкция по эксплуатации