Home
Главная
Metabo
Шлифовальная Машина
GA 18 LTX G
Инструкция по эксплуатации Страница: 7

Metabo GA 18 LTX G [7/27] English en

ENGLISH en

back. Large workpieces tend to sag under their own

weight. Supports must be placed under the work-

piece near the line of cut and near the edge of the

workpiece on both sides of the wheel.

f) Use extra caution when making a "pocket

cut" into existing walls or other blind areas. The

protruding wheel may cut gas or water pipes, elec-

trical wiring or objects that can cause kickback.

3.5 Safety Warnings Specific for Sanding

Operations:

a) Do not use oversized sanding disc paper.

Follow manufacturer's recommendations when

selecting sanding paper. Larger sanding paper

extending beyond the sanding pad presents a

laceration hazard and may cause snagging, tearing

of the disc or kickback.

3.6 Safety Warnings Specific for Polishing

Operations:

a) Loose parts on the polishing guard, espe-

cially the fastening cords, are not permitted.

Tuck away or shorten the fastening cords.

Loose, spinning fastening cords may make contact

with your fingers or become caught in the work-

piece.

3.7 Safety Warnings Specific for Wire Brush-

ing Operations:

a) Be aware that wire bristles are lost by the

brush even during ordinary operation. Do not

overstress the wires by applying excessive

load to the brush. The wire bristles can easily

penetrate light clothing and/or skin.

b) If the use of a guard is recommended for wire

brushing, do not allow any interference of the

wire wheel or brush with the guard. Wire wheel

or brush may expand in diameter due to work load

and centrifugal forces.

3.8 Additional Safety Instructions

WARNING – Always wear protective

goggles.

Use elastic cushioning layers if they have been

supplied with the abrasive and if required.

Observe the specifications of the tool or accessory

manufacturer! Protect the discs from grease or

impacts!

Abrasives must be stored and handled with care in

accordance with the manufacturer's instructions.

Never use parting grinder discs for roughing work.

Do not apply pressure to the side of parting grinder

discs.

The workpiece must lay flat and be secured against

slipping, e.g. using clamps. Large workpieces must

be supported adequately.

Engage the spindle locking button (4) only when the

motor is inoperative. (GA 18 LTX, GE 710 Plus,

GA 18 LTX G, GE 950 G Plus)

Keep hands away from the rotating tool! Remove

chips and similar material only when the machine is

at a standstill.

Prior to use, ensure that the coated abrasive is

properly fitted and secured. Run the tool in idling for

60 seconds in a safe position and bring to a stand-

still immediately if there are significant vibrations or

if other deficiencies are determined. If such a situa-

tion occurs, check the machine to determine the

cause.

Ensure that sparks produced during work do not

constitute a risk to the user or other personnel and

are not able to ignite inflammable substances.

Endangered areas must be protected with flame-

resistant covers. Make sure that fire-risk areas are

always provided with suitable fire extinguishers.

Dust from material such as paint containing lead,

some wood species, minerals and metal may be

harmful. Contact with or inhalation of the dust may

cause allergic reactions and/or respiratory diseases

to the operator or bystanders.

Certain kinds of dust are classified as carcinogenic

such as oak and beech dust especially in

conjunction with additives for wood conditioning

(chromate, wood preservative). Material containing

asbestos must only be treated by specialists.

- Where the use of a dust extraction device is

possible it shall be used.

- The work place must be well ventilated.

- The use of a dust mask of filter class P2 is recom-

mended.

Follow national requirements for the materials you

want to work with.

Materials that generate dusts or vapours that may

be harmful to health (e.g. asbestos) must not be

processed.

When working in dusty conditions, ensure that

ventilation openings are not blocked. If it becomes

necessary to remove dust, first disconnect the

power tool from the mains supply (use non-metallic

objects) and avoid damaging internal components.

Damaged, eccentric or vibrating tools must not be

used.

In the interests of safety, ensure that the rubber

sleeve (3) or additional handle is fitted while

working (5).

3.9 Special safety instructions for mains

powered machines:

Pull the plug out of the plug socket before any

adjustments, conversions or servicing are

performed.

During machining, of metals in

particular, conductive dust can form

deposits inside the machine. This can lead to the

transfer of electrical energy onto the machine

housing. This can mean a temporary danger of

electric shocks. This is why it is necessary when the

machine is running to blow compressed air through

the rear ventilation slots of the machine regularly,

frequently and thoroughly. Here, the machine must

be held firmly.

We recommend using a stationary extractor system

and connecting a residual current circuit-breaker

(RCD) upstream. When the machine is shut down

via the FI circuit-breaker, it must be checked and

Metabo GA 18 LTX G [7/27] English en

Содержание

Похожие устройства