Home
Главная
Philips
Парогенератор
GC8320
Инструкция по эксплуатации Страница: 15

Philips GC8320 [15/190] English

Problem Cause Solution

The set ironing temperature is too low for

steam ironing.

Set a temperature of 2 or higher.

You have set steam setting a (no steam). Set steam setting ECO, [

(moderate steam) or p (maximum

steam).

You have not placed the water

tank properly in the steam generator.

Place the water tank properly in the

steam generator (‘click’).

When the iron is set to a very high

temperature, the steam produced is

dry and hardly visible. It is even less

visible when the ambient temperature is

relatively high and it is entirely invisible

when the temperature is set to MAX.

Set the iron to a lower temperature,

e.g. 2, to check if the iron actually

produces steam.

Water droplets

come out of the

soleplate.

The set temperature is too low for steam

ironing.

Set a temperature of 2 or higher.

When you start steam ironing and when

you stop steam ironing for a while, the

steam still present in the supply hose

cools down and condenses into water. This

causes water droplets to come out of the

soleplate.

This is normal. When you start

ironing or when you continue

ironing after an interruption, hold

the iron over an old cloth and press

the steam trigger. Wait until steam

instead of water comes out of the

soleplate.

Flakes and impurities

come out of the

soleplate or the

soleplate is dirty.

Impurities or chemicals present in the

water have deposited in the steam vents

and/or on the soleplate.

Clean the soleplate with a damp

cloth.

The appliance

produces a pumping

sound.

Water is pumped into the steam

generator.

This is normal.

The pumping sound does not stop. Unplug the iron immediately and

contact an authorised Philips service

centre.

The iron produces

steam continuously.

The steam lock has been set to ‘on’. Set the steam lock to ‘off’ if you

only want to obtain steam when

you press the steam trigger (see

section ‘Steam lock function’).

Dirty water comes

out of the soleplate.

Too much scale and minerals have

accumulated inside the steam generator.

Rinse the steam generator. See

chapter ‘Cleaning and maintenance’.

ENGLISH 15

Содержание

Похожие устройства

ENGLISH 15 1 Problem Cause Solution The set ironing temperature is too low for steam ironing Set a temperature of or higher You have set steam setting no steam Set steam setting ECO moderate steam or maximum steam You have not placed the water tank properly in the steam generator Place the water tank properly in the steam generator click When the iron is set to a very high temperature the steam produced is dry and hardly visible It is even less visible when the ambient temperature is relatively high and it is entirely invisible when the temperature is set to MAX Set the iron to a lower temperature e g to check if the iron actually produces steam The set temperature is too low for steam ironing Set a temperature of or higher When you start steam ironing and when you stop steam ironing for a while the steam still present in the supply hose cools down and condenses into water Th is causes water droplets to come out of the soleplate This is normal When you start ironing or when you continue ironing after an interruption hold the iron over an old cloth and press the steam trigger Wait until steam instead of water comes out of the soleplate Flakes and impurities come out of the soleplate or the soleplate is dirty Impurities or chemicals present in the water have deposited in the steam vents and or on the soleplate Clean the soleplate with a damp cloth The appliance produces a pumping sound Water is pumped into the steam generator This is normal The pumping sound does not stop Unplug the iron immediately and contact an authorised Philips service centre The iron produces steam continuously The steam lock has been set to on Set the steam lock to off if you only want to obtain steam when you press the steam trigger see section Steam lock function Dirty water comes out of the soleplate Too much scale and minerals have accumulated inside the steam generator Rinse the steam generator See chapter Cleaning and maintenance Water droplets come out of the soleplate

Скачать