Главная
Skipped breadcrumb items
SE 4000
Инструкция по эксплуатации Страница: 8

Главная
Metabo
SE 4000
Инструкция по эксплуатации Страница: 8

Metabo SE 4000 — инструкция по эксплуатации и безопасности для отверток [8/52]

Превью страниц Страница 8 / 52

ENGLISHen

Original instructions

We, being solely responsible, hereby declare that

these screwdrivers conform to the standards and

directives specified on page 3.

The machine is designed for inserting and removing

screws in/from wood, gypsum plasterboards on

metal profile rails or timbers, plastics and similar

materials.

The machine is not suitable for inserting and

removing screws in metal materials.

The user bears sole responsibility for damage

caused by improper use.

Generally accepted accident prevention

regulations and the enclosed safety information

must be observed.

For your own protection and for the

protection of your electrical tool, pay

attention to all parts of the text that are

marked with this symbol!

WARNING – Reading the operating instruc-

tions will reduce the risk of injury.

WARNING Read all safety warnings and

instructions. Failure to follow all safety warn-

ings and instructions may result in electric shock,

fire and/or serious injury.

Keep all safety instructions and information for

future reference.

Pass on your electrical tool only together with these

documents.

Pull the plug out of the plug socket before any

adjustments or servicing are performed.

Take care to avoid gas, electricity, and water

supplies!

Hold the power tool only at insulated housing parts

if there is any danger of making contact with

concealed electric cables or the supply cable.

Contact with live wires energises the metal parts of

the housing and can cause electric shock to the

operator.

Wear ear protectors when working for long periods

of time. High noise levels over a prolonged period of

time may affect your hearing.

Note that high counter-torques are possible during

work. Always hold the tool firmly, ensure you have

good footing and concentrate when working.

Do not keep the ventilation slots closed.

Materials that generate dusts or vapours that may

be harmful to health (e.g. asbestos) must not be

processed.

See page 2.

1 Rotation selector switch

2Trigger

3 Locking button (continuous activation)

4 Scaffold hook mounting

5 Scaffold hook *

6Depth stop

7Tool *

8 Quick-release lock

9Stop sleeve

* depending on equipment/not in scope of delivery

Before plugging in, check to see that the rated

mains voltage and mains frequency,

as stated on the rating label, match your power

supply.

Scaffold hook (5) assembly: Clip into

scaffold

hood mounting (4)

and turn until it engages in the

desired position.

7.1 Switching On and Off

To start the machine, press the trigger switch (2).

The speed can be changed at the trigger switch by

pressing.

For continuous operation the trigger switch can be

locked using the lock button (3). To stop the

machine, press the trigger switch again.

7.2 Selection of direction of rotation

Do not activate the rotation selector

switch (1) unless the motor has

completely stopped.

Select direction of rotation:

R=Clockwise

L=Counter-clockwise

7.3 Tool change

Inserting tool:

Hold the quick-change lock (8) firmly in position and

insert tool.

Check that the quick-change lock (8) is in its front

position. Pull on the tool. The tool must be held

securely in position by the quick-change lock (8).

Removing the tool:

(See page 2, illustration 1a)

- Remove depth stop (6).

1. Conformity Declaration

2. Specified Use

3. General Safety Instructions

4. Special Safety Instructions

5. Overview

6. Commissioning

7. Use

Metabo SE 4000 — инструкция по эксплуатации и безопасности для отверток [8/52]

Содержание

Похожие устройства