Viking MA 339 [44/572] General

Viking MA 339 C [44/572] General
0478 131 9917 F - EN
42
MA 339 C:
MA 339:
7.1 General
Place the machine on level and firm
ground when performing all the
operations described.
Charge battery (Ö 8.4).
7.2 Installing mono handlebar
(MA 339 C)
Locate mono handlebar (1) in
working position in handlebar
console (2) and hold.
Insert left and right clamping pieces (H)
into handlebar console (2) as
illustrated. Fit washer (E) onto
screw (F) and guide screw (F) through
clamping pieces and lower handlebar
from the inside to the outside.
Fit washer (E).
5. Description of symbols
Caution!
Read the instruction man-
ual before initial use.
Risk of injury:
Keep other persons out of
the danger area.
Caution –
sharp cutting blades!
The cutting blades run on
after the motor has been
switched off. Remove the
locking device (safety plug)
before performing mainte-
nance work.
MA 339:
Start motor.
MA 339 C:
Start motor.
MA 339 C:
Stop motor.
Battery is too warm.
Charging starts after the
cooling-down period, i.e.
the battery can only be
used after the cooling-
down period.
The battery is defective
and must be replaced.
6. Standard equipment
Item Designation Qty.
A Basic unit 1
B Upper part of grass catcher
box
1
C Lower part of grass catcher
box
1
D Pin 2
N Safety plug 1
O Charger
P Battery
Instruction manual 1
E Washer 2
F Screw 1
G Pin 1
H Clamping piece 2
I Quick-clamping device 1
J Flat head bolt 2
K Cable guide 1
L Rotary handle 2
2
M Cable clip 1
The standard equipment may vary
depending on the country and
version type.
7. Preparing the machine for
operation
Risk of injury!
Observe the safety instructions in
the section "For your safety" (Ö 4.).
Remove the safety plug,
particularly before
performing any work on the lawn
mower (Ö 9.1).
Upon delivery, the batteries are
charged to approx. 30%. They must
be therefore be charged before
being used for the first time.
3
4

Содержание

Скачать
Случайные обсуждения