Home
Главная
Flex
Шлифовальная Машина
SE 14-2 150 Set
Инструкция по эксплуатации Страница: 17

Flex SE 14-2 150 Set Инструкция по эксплуатации онлайн [17/240] 601257

SE 14-2 125/SE 14-2 150



Regularly clean the power tool's air vents.

The motor's fan will draw the dust inside

the housing and excessive accumulation

of powdered metal may cause electrical

hazards.



Do not operate the power tool near

flammable materials.

Sparks could ignite these materials.



Do not use accessories that require liquid

coolants.

Using water or other liquid coolants may result

reesult in electrocution or shock.

Special safety instructions

for sanding:



Use only those sanding tools authorised

for use with your electric power tool and

the guard designated for this sanding

tool.

Sanding tools, which are not designated

for use with the electric power tool, cannot

be adequately shielded and are unsafe.



The guard must be attached securely

to the electric power tool and adjusted

to ensure maximum safety, i.e. the smal-

lest possible part of the sanding tool

is exposed to the operator.

The guard should protect the operator from

fragments and accidental contact with the

sanding tool.



Sanding tools may be used for the

recommended applications only.

For example: Never sand with the side

area of a diamond sanding pad.

Diamond sanding pads are designed

to remove material with the underside

of the sanding pad. If a lateral force is applied

to these sanding tools, they may shatter.



Always use undamaged clamping

flanges in the correct size and shape

for the insertion tool you have selected.

Suitable flanges support the insertion tools

and therefore reduce the risk of a break.



Do not use worn insertion tools from

larger electric power tools.

Insertion tools for larger electric power tools

are not designed for the higher speeds

of smaller electric power tools and may break.

Special safety instructions

for sanding:



Do not use oversized sanding sheets, but

follow the manufacturer’s specifications

for the size of sanding sheets.

Sanding sheets which project over

the sanding pad may cause injuries

as well as block and rip the sanding

sheets or cause a kickback.

Special safety instructions

for polishing:



Do not allow any loose portion

of the polishing bonnet or its attach-

ment strings to spin freely.

Tuck away or trim any loose attach-

ment strings.

Loose and spinning attachment strings

can entangle your fingers or snag on the

workpiece.

Kickback and Related Warnings:

Kickback is the sudden reaction to a pinched

or snagged rotating insertion tool, such

as a sanding disc, sanding pad, wire brush,

etc. Pinching or snagging may cause a rotating

insertion tool to stop abruptly.

For example, if an abrasive wheel is snagged

or pinched by the workpiece, the edge of the

wheel that is entering into the pinch point can

dig into the surface of the material causing the

wheel to climb out or kick out.

The wheel may either jump toward or away

from the operator, depending on direction

of the wheel's movement at the point of pin-

ching. Abrasive wheels may also break under

these conditions.

For example, if a sanding disc is snagged

or pinched by the workpiece, the edge of the

sanding disc which is entering the workpiece

may become caught and cause the sanding

disc to break off or kick back.

The sanding disc then moves towards or away

from the operator, depending on the direction

in which the disc is rotating at the point

of pinching. Sanding discs may also break

under these conditions.

A recoil occurs if the electric power tool is used

incorrectly or improperly.

A recoil can be prevented by appropriate

precautions as described below.

Содержание

Похожие устройства

en SE 14 2 125 SE 14 2 150 Regularly clean the power tool s air vents The motor s fan will draw the dust inside the housing and excessive accumulation of powdered metal may cause electrical hazards Do not operate the power tool near flammable materials Sparks could ignite these materials Do not use accessories that require liquid coolants Using water or other liquid coolants may result reesult in electrocution or shock Special safety instructions Special safety instructions for sanding Do not allow any loose portion of the polishing bonnet or its attach ment strings to spin freely Tuck away or trim any loose attach ment strings Loose and spinning attachment strings can entangle your fingers or snag on the workpiece Use only those sanding tools authorised for use with your electric power tool and the guard designated for this sanding tool Sanding tods which are not designated for use with the electric power tod cannot be adequately shielded and are unsafe The guard must be attached securely to the electric power tool and adjusted to ensure maximum safety i e the smal lest possible part of the sanding tool is exposed to the operator The guard should protect the operator from fragments and accidental contact with the sanding tool Sanding tools may be used for the recommended applications only For example Never sand with the side area of a diamond sanding pad Diamond sanding pads are designed to remove material with the underside of the sanding pad If a lateral force is applied to these sanding tools they may shatter Always use undamaged clamping flanges in the correct size and shape for the insertion tool you have selected Suitable flanges support the insertion tools and therefore reduce the risk of a break Do not use worn insertion tools from larger electric power tools Insertion tools for larger electric power tools are not designed for the higher speeds of smaller electric power tools and may break for sanding Do not use oversized sanding sheets but follow the manufacturer s specifications for the size of sanding sheets Sanding sheets which project over the sanding pad may cause injuries as well as block and rip the sanding sheets or cause a kickback Special safety instructions for polishing Kickback and Related Warnings Kickback is the sudden reaction to a pinched or snagged rotating insertion tool such as a sanding disc sanding pad wire brush etc Pinching or snagging may cause a rotating insertion tool to stop abruptly For example if an abrasive wheel is snagged or pinched by the workpiece the edge of the wheel that is entering into the pinch point can dig into the surface of the material causing the wheel to climb out or kick out The wheel may either jump toward or away from the operator depending on direction of the wheel s movement at the point of pin ching Abrasive wheels may also break under these conditions For example if a sanding disc is snagged or pinched by the workpiece the edge of the sanding disc which is entering the workpiece may become caught and cause the sanding disc to break off or kick back The sanding disc then moves towards or away from the operator depending on the direction in which the disc is rotating at the point of pinching Sanding discs may also break under these conditions A recoil occurs if the electric power tool is used incorrectly or improperly A recoil can be prevented by appropriate precautions as described below 17

Скачать