Einhell BT-SM 2131 Dual Инструкция по эксплуатации онлайн [22/148] 73535
![Einhell BT-SM 2131 Dual Инструкция по эксплуатации онлайн [22/148] 73535](/views2/1078968/page22/bg16.png)
and with light pressure downwards until the saw
blade (7) has completely cut through the
workpiece.
With the drag guide (23) not fixed in place: Pull
the machine head (4) all the way to the front and
then use the handle to move it downwards
steadily and with light pressure. Now push the
machine head (4) slowly and steadily to the very
back until the saw blade (7) has completely cut
through the workpiece.
When the cutting operation is completed, move
the machine head (4) back to its upper (home)
position and release the ON/OFF button (2).
Important. The integral resetting springs will
automatically lift the machine head. Do not simply let
go of the handle (1) after cutting, but allow the
machine head (4) to rise slowly, applying slight
counter pressure as it does so.
7.2 Cross cut 90° and turntable 0° - 45°
(Fig. 1-3, 12)
The crosscut saw can be used to make crosscuts of
0°- 45° to the left and 0° - 45° to the right in relation to
the stop rail.
Release the turntable (17) by slackening the
locking screw (14).
Turn the turntable (17) and scale pointer (15) to
the desired angular setting on the dial (16) and
lock into place with the locking screw (14). The
saw has locking positions at angles of - 45°, -
31.6°, -22.5°, -15°, 0°, 15°, 22.5°, 31.6° and 45°,
at which the turntable (17) audibly clicks into
position.
Retighten the locking screw (14) to secure the
turntable (17) in place.
Cut as described under section 7.1.
7.3 Miter cut 0°- 45° and turntable 0° (Fig. 1-3, 13)
The crosscut saw can be used to make miter cuts to
the left of 0°-45° and to the right of 0°-45° in relation
to the work surface.
If required, dismantle the clamping device (8) or
mount on the opposite side of the fixed saw table
(18).
Move the machine head (4) to its upper position.
Fasten the turntable (17) in 0° position.
Adjust the miter angle on the machine head and
the stop rail as described under points 6.5 and
6.6.
Cut as described under section 7.1.
7.4 Miter cut 0°- 45° and turntable 0°- 45°
(Fig. 1-3, 14)
The crosscut saw can be used to make miter cuts to
the left of 0°-45° and to the right of 0°-45° in relation
to the work surface, with simultaneous setting of the
turntable from 0°-45° to the left or 0°-45° to the right in
relation to the stop rail (double miter cut).
If required, dismantle the clamping device (8) or
mount on the opposite side of the fixed saw table
(18).
Move the machine head (4) to its upper position.
Release the turntable (17) by slackening the
locking screw (14).
Use the handle (1) to adjust the turntable (17) to
the angle required (in this connection see also
section 7.2).
Retighten the locking screw (14) to secure the
turntable in place.
Adjust the miter angle on the machine head and
the stop rail as described under points 6.5 and
6.6.
Cut as described under section 7.1.
7.5 Limiting the cutting depth (Fig. 15)
The cutting depth can be infinitely adjusted using
the screw (27). Turn the screw (27) in or out to set
the required cutting depth and then retighten the
knurled nut on the screw (27).
Check the setting by completing a test cut.
7.6 Sawdust bag (Fig. 2)
The saw is equipped with a debris bag (22) for
sawdust and chips.
The debris bag (22) can be emptied by means of a
zipper at the bottom (1).
7.7 Changing the saw blade (Fig. 1, 16-18)
Before changing the saw blade: Remove the
power plug!
Wear work gloves to prevent injury when
changing the saw blade.
Swing the machine head upwards (4).
Undo the screw (z) on the cover plate (f) of the
saw blade.
Pull back the adjustable blade guard (6) and at
the same time turn the cover plate to achieve
access to the flange bolt.
Press the saw shaft lock (5) with one hand while
positioning the Allen key (d) on the flange bolt
(31) with the other hand. The saw shaft lock (5)
engages after no more than one rotation.
Now, using a little more force, slacken the flange
screw (31) in the clockwise direction.
Turn the flange screw (31) right out and remove
the external flange (32).
Take the blade (7) off the inner flange and pull out
22
GB
Anleitung_BT_SM_2131_Dual_SPK7:_ 14.10.2010 15:39 Uhr Seite 22
Содержание
- Art nr 43 08 0 i nr 11010 1
- Inhaltsverzeichnis 8
- Gerätebeschreibung 9
- Sicherheitshinweise 9
- Bestimmungsgemäße verwendung 10
- Lieferumfang bild 1 3 10
- Geräusch und vibration 11
- Technische daten 11
- Vor inbetriebnahme 12
- Betrieb 13
- Austausch der netzanschlussleitung 15
- Entsorgung und wiederverwertung 15
- Lagerung 15
- Reinigung wartung und ersatzteilbestellung 15
- Table of contents 17
- Layout 18
- Safety information 18
- Intended use 19
- Items supplied fig 1 3 19
- Technical data 19
- Before starting the equipment 20
- Sound and vibration 20
- Functions 21
- Cleaning maintenance and ordering of spare parts 23
- Replacing the power cable 23
- Storage 23
- Disposal and recycling 24
- Sommaire 26
- Consignes de sécurité 27
- Description de l appareil 27
- Utilisation conforme à l affectation 28
- Volume de livraison figure 1 3 28
- Bruit et vibrations 29
- Caractéristiques techniques 29
- Avant la mise en service 30
- Fonctionnement 31
- Mise au rebut et recyclage 33
- Nettoyage maintenance et commande des pièces de rechange 33
- Remplacement de la ligne de raccordement réseau 33
- Stockage 33
- Indice 35
- Avvertenze di sicurezza 36
- Descrizione dell apparecchio 36
- Elementi forniti fig 1 3 37
- Utilizzo proprio 37
- Caratteristiche tecniche 38
- Rumore e vibrazioni 38
- Prima della messa in esercizio 39
- Esercizio 40
- Conservazione 42
- Pulizia manutenzione e ordinazione dei pezzi di ricambio 42
- Smaltimento e riciclaggio 42
- Sostituzione del cavo di alimentazione 42
- Innehållsförteckning 44
- Beskrivning av maskinen 45
- Säkerhetsanvisningar 45
- Leveransomfattning bild 1 3 46
- Tekniska data 46
- Ändamålsenlig användning 46
- Buller och vibration 47
- Innan du använder maskinen 47
- Använda maskinen 49
- Byta ut nätkabeln 50
- Rengöring underhåll och reservdelsbeställning 50
- Förvaring 51
- Skrotning och återvinning 51
- Bezpečnostní pokyny 54
- Popis přístroje 54
- Použití podle účelu určení 55
- Rozsah dodávky obr 1 3 55
- Technická data 55
- Hluk a vibrace 56
- Před uvedením do provozu 56
- Provoz 58
- Výměna síťového napájecího vedení 59
- Čištění údržba a objednání náhradních dílů 59
- Likvidace a recyklace 60
- Uložení 60
- Bezpečnostné pokyny 63
- Popis prístroja 63
- Objem dodávky obr 1 3 64
- Správne použitie 64
- Hluk a vibrácia 65
- Technické údaje 65
- Pred uvedením do prevádzky 66
- Prevádzka 67
- Výmena sieťového prípojného vedenia 68
- Likvidácia a recyklácia 69
- Skladovanie 69
- Čistenie údržba a objednanie náhradných dielov 69
- Inhoudsopgave 71
- Beschrijving van het toestel 72
- Veiligheidsaanwijzingen 72
- Leveringsomvang fig 1 3 73
- Reglementair gebruik 73
- Geluid en vibratie 74
- Technische gegevens 74
- Vóór inbedrijfstelling 75
- Bedrijf 76
- Vervangen van de netaansluitkabel 77
- Opslag 78
- Reiniging onderhoud en bestellen van wisselstukken 78
- Verwijdering en recyclage 78
- Índice de contenidos 80
- Descripción del aparato 81
- Instrucciones de seguridad 81
- Uso adecuado 82
- Volumen de entrega fig 1 3 82
- Características técnicas 83
- Antes de la puesta en marcha 84
- Funcionamiento 85
- Almacenamiento 87
- Cambiar el cable de conexión a la red eléctrica 87
- Eliminación y reciclaje 87
- Mantenimiento limpieza y pedido de piezas de repuesto 87
- Índice 89
- Descrição do aparelho 90
- Instruções de segurança 90
- Material a fornecer figura 1 3 91
- Utilização adequada 91
- Dados técnicos 92
- Ruído e vibração 92
- Antes da colocação em funcionamento 93
- Funcionamento 94
- Armazenagem 96
- Eliminação e reciclagem 96
- Limpeza manutenção e encomenda de peças sobressalentes 96
- Substituição do cabo de ligação à rede 96
- Sisällysluettelo 98
- Laitteen kuvaus 99
- Turvallisuusmääräykset 99
- Määräysten mukainen käyttö 100
- Tekniset tiedot 100
- Toimituksen laajuus kuvat 1 3 100
- Ennen käyttöönottoa 101
- Melu ja tärinä 101
- Käyttö 103
- Puhdistus huolto ja varaosatilaus 104
- Verkkoliitäntäjohdon vaihto 104
- Käytöstäpoisto ja uusiokäyttö 105
- Säilytys 105
- Περιεχόμενα 107
- Περιγραφή της συσκευής 108
- Υποδείξεις ασφαλείας 108
- Ενδεδειγμένη χρήση 109
- Συμπαραδιδόμενα εικ 1 3 109
- Τεχνικά χαρακτηριστικά 110
- Πριν τη θέση σε λειτουργία 111
- Λειτουργία 112
- Αντικατάσταση καλωδίου σύνδεσης με το δίκτυο 114
- Καθαρισμός συντήρηση και παραγγελία ανταλλακτικών 114
- Φύλαξη 114
- Διάθεση στα απορρίμματα και επαναχρησιμοποίηση 115
- I çindekiler 117
- Alet açıklaması 118
- Güvenlik uyarıları 118
- Kullanım amacına uygun kullanım 119
- Sevkiyatın içeriği şekil 1 3 119
- Gürültü emisyon değerleri 120
- Teknik özellikler 120
- Çalıştırmadan önce 121
- Çalıştırma 122
- Elektrik kablosunun değiştirilmesi 123
- Bertaraf etme ve geri kazanım 124
- Depolama 124
- Temizleme bakım ve yedek parça siparişi 124
- 108 ec 125
- 14 ec_2005 88 ec 125
- 32 ec_2009 125 ec 125
- 396 ec_2009 142 ec 125
- 404 ec_2009 105 ec 125
- 686 ec_96 58 ec 125
- Anleitung_bt_sm_2131_dual_spk7 _ 14 0 010 15 40 uhr seite 125 125
- Annex iv 125
- Annex v annex vi 125
- Isc gmbh eschenstraße 6 d 94405 landau isar 125
- Konformitätserklärung 125
- Landau isar den 17 9 010 125
- Standard references en 61029 1 en 61029 2 9 en 60825 1 en 55014 1 en 55014 2 en 61000 3 2 en 61000 3 11 125
- Zug kapp und gehrungssäge bt sm 2131 dual einhell 125
- Anleitung_bt_sm_2131_dual_spk7 _ 14 0 010 15 40 uhr seite 130 130
- Anleitung_bt_sm_2131_dual_spk7 _ 14 0 010 15 40 uhr seite 131 131
- Anleitung_bt_sm_2131_dual_spk7 _ 14 0 010 15 40 uhr seite 132 132
- Anleitung_bt_sm_2131_dual_spk7 _ 14 0 010 15 40 uhr seite 133 133
- Anleitung_bt_sm_2131_dual_spk7 _ 14 0 010 15 40 uhr seite 134 134
- T guarantee certificate 135
- P bulletin de garantie 136
- C certificato di garanzia 137
- U garantibevis 138
- J záruční list 139
- W záručný list 140
- N garantiebewijs 141
- M certificado de garantía 142
- O certificado de garantia 143
- Q takuutodistus 144
- Z εγγυηση 145
- Z garanti belgesi 146
- Isc gmbh eschenstraße 6 94405 landau isar deutschland 147
- K garantieurkunde 147
- Anleitung_bt_sm_2131_dual_spk7 _ 14 0 010 15 40 uhr seite 148 148
- Service hotline 01805 120 509 www isc gmbh info mo fr 8 00 20 00 uhr 148
Похожие устройства
- Tefal Easy Pressing GV5245E0 Инструкция по эксплуатации
- Viconte VC-439 Инструкция по эксплуатации
- Einhell BT-MS 2112 Инструкция по эксплуатации
- Viconte VC-438 Инструкция по эксплуатации
- Einhell BT-MS 250 L Инструкция по эксплуатации
- Indesit SB 200 Инструкция по эксплуатации
- Viconte VC-437 Инструкция по эксплуатации
- Einhell RT-XM 305 U Инструкция по эксплуатации
- LG GA-B379BQA Инструкция по эксплуатации
- Viconte VC-436 Инструкция по эксплуатации
- Einhell RT-SM 430 U Инструкция по эксплуатации
- Liebherr CN 3503-21 Инструкция по эксплуатации
- Viconte VC-435 Инструкция по эксплуатации
- Einhell RT-SM 305 L Инструкция по эксплуатации
- Liebherr SBSes 7165-21 Инструкция по эксплуатации
- Viconte VC-433 Инструкция по эксплуатации
- Liebherr WTb 4212-20 Инструкция по эксплуатации
- Viconte VC-431 Инструкция по эксплуатации
- Liebherr WKt 5552-20 Инструкция по эксплуатации
- Viconte VC-314 Инструкция по эксплуатации