![M-Audio X-Session UC-17 [11/16] Assigning mmc control to a button](/img/pdf.png)
M-Audio X-Session UC-17 [11/16] Assigning mmc control to a button
![M-Audio X-Session UC-17 [11/16] Assigning mmc control to a button](/views2/1790355/page11/bgb.png)
Evolution X-Session Advanced User Guide
22
Right-click on a memory to view the contents. Please note that it is not possible to edit
the contents of a memory. The Sys Ex librarian will simply allow you to rearrange the
order of memories, or copy memories between one memory dump and another.
Once you have named all your presets, and organised them in the desired order, click
’save’ to save the content.
Alternatively you can click on the File menu and select save to save the file with the
previously assigned file name, or save as to assign the memory dump a new file name.
The shortcut key to save Bank 1 is CTRL+S.
Make sure you give the file a name which allows you to quickly identify your collection of
setups.
To load a memory setup file back in to the librarian, click on the ’Load’ button and select
the required file. The loaded preset setups will appear in the Bank Window. You can
then either send it directly to the Evolution device by clicking send, or edit it.
Alternatively, select Open from the File menu.
The shortcut key for loading is CTRL+O
We strongly recommend you register your ownership of the Evolution Librarian if you
would like to be kept informed about future development. As you can see from the version
number, the software is at an early version 1.1 stage and we will continue to work on
enhancements for the software.
To register your copy, please visit www.evolution.co.uk/register
Viewing The Contents Of A Memory
Saving A Setup
Loading A Setup
Future Development Of The Librarian
11
Evolution X-Session Advanced User Guide
The 10 assignable buttons can each be assigned to toggle between two values. You
may for instance want to send out value 15 when you first press the button followed by
value 74 when you press the button for a second time. This is how you do it:
1. Press the Function button labelled DATA MSB 2 times.
2. Type in 15 using the numerical keypad or the +/- keys.
3. Press the Function button labelled DATA LSB 2 times.
4. Type in 74 using the numerical keypad or the +/- keys.
If you want the button to send the same value every time you press it, simply type in the
same value both times.
As already described, the standard MIDI controller numbers range from 0 to 131. We
have extended the list of MIDI CC’s that can be assigned to the controllers of the
X-Session to include RPN/NRPN, MMC and General MIDI 1&2 SysEx messages.
These advanced messages are as easy to program as a regular MIDI CC instruction by
entering values 132 to 152 when programming MIDI CC’s. The charts on page 8 and 9
(or Appendix B) show you what number correspond to each message
To program the values required for these advanced messages, the X-Session requires
you to press the PROGRAM, DATA LSB and DATA MSB buttons twice respectively.
Pressing only once will send the program and bank change instructions “on the fly” as
described earlier.
Lets look at a couple of examples to see how this works. Please refer to the chart in
Appendix B so you get to grips with the principle:
1. Select the button you want to control the MMC message.
2. Press “ASSIGN” on the X-Session.
3. Type in “149” using the numerical keypad.
This is the number that corresponds to the MMC instruction, as per the chart on
page 8 and 9.
4. Press “Channel” once.
5. Type in “127”, using the numerical keypad.
This ensures that the message is set to all device ID numbers. For more
information about this, please read “About SysEx Messages & Device ID”
on page 13.
4. Press the “DATA LSB” button twice.
5. Enter a number from the chart on the next page to select the MMC
message you want:
Setting Toggle Values For The Buttons
RPN/NRPN, GM 1+2 SysEx & Other Messages
Assigning MMC Control To A Button
Содержание
- Appendix h x session preset chart 1
- About the advanced guide 2
- Appendix f roland gs and yamaha xg nrpn sup port to roland jv xp 2
- Appendix g general midi reverb and chorus types 2
- Terminology 2
- Appendix e standard midi controller numbers midi cc s 3
- On the fly operations 3
- Midi note numbers 4
- Sending bank changes on the fly 4
- Sending program changes on the fly 4
- Sending snap shot 4
- About the cross fader 5
- Appendix d useful midi data 5
- F17 controls the volume of the top drum module while f18 controls the volume of the bottom drum module this means you can flick between the two modules by flicking the fader far left or right since when f17 is 0 f18 is 127 and when f18 is 0 f17 is 127 5
- General midi instruments 5
- Guitar brass synth pad sound effects 5
- Muting all controllers 5
- Piano bass reed synth effects 5
- The cross fader can be assigned to two midi cc values by editing f17 and f18 when it is moved both f17 and f18 will be sent out f17 will increment from left to right while f18 will increment from right to left so f17 and f18 work against each other as an example this has been put to practice in the rebirth preset 5
- To mute all controllers and the cross fader press the ctrl mute buttons this allows you to alter the position of the controller without affecting the settings of your software ctrl mute does not affect buttons and as soon as an assignable button or a function key is pressed the controllers are turned back on alternatively you can press the ctrl mute buttons again to turn the controllers back on when you first press the ctr mute buttons you will see the lcd display off chang ing the position of a controller with controller mute engaged the lcd will always display off to indicate no data is being sent out by the x session to cancel the controller mute function simply press a function key or keys or one of the assignable buttons this is a very useful feature if you are switching between presets on the x session with the controllers out of position you will be able to move the controller to a position relative to the software s controller value rather than causing the software s controller 5
- To select f18 for programming you need to use the control select buttons f17 can be selected for editing by moving the cross fader 5
- Appendix c hexadecimal conversion chart 6
- Decimal value 6
- Hexadeci mal value 6
- Hexadecimal to decimal conversion chart 6
- B2 the buttons 7
- Data lsb press twice 7
- Data msb press twice 7
- Midi cc description program press twice 7
- Programming editing the x session 7
- Appendix b assignable midi cc s 8
- B1 the cross fader and rotary controllers 8
- Cross fader rotary dials 8
- Data msb press twice 8
- Introduction to x session programming options 8
- Midi cc description data lsb press twice 8
- On the x session 8
- 127 0 x 9
- 16 1 16 x 9
- After keys touch ch s 9
- Appendix a midi implementation chart 9
- Assignable midi buttons 9
- Aux local on off messages all notes off active sense reset 9
- Basic default channel changed 9
- Before you can assign a midi cc to one of the x session s controllers you will need to select it for editing there are 2 methods for doing this 1 press control select the lcd will display the controller symbol the symbol will be flashing to indicate the controller settings can be altered the 3 digit display will show the number of the currently selected controller proceeded by a c or an f if the cross fader is selected 2 type in the number of the controller using the numeric keypad or the buttons or move the cross fader rotary controller simply moving a fader rotary controller will make it the currently selected controller ready for editing to select the second cross fader controller value f18 please use method 1 it is also not possible to select any of the 10 numerical buttons by pressing them since during edit mode they are used to enter numerical values to program these buttons please use the first method 9
- Control 0 119 change 0 x 9
- Default mode messages altered 9
- Function transmitted received remarks 9
- Note number true voice 9
- Notes 0 yes x no 9
- Pitch bend 0 x 9
- Program change true number 9
- Selecting a controller for editing 9
- Song position common song select 9
- System clock exclusive commands 9
- System exclusive gm gm2 mmc memory dump 9
- Velocity note on note off 9
- Appendix a g factory preset list 10
- Assigning an individual midi channel 10
- Assigning midi cc s 10
- Changing the global midi channel 10
- Assigning mmc control to a button 11
- Future development of the librarian 11
- Loading a setup 11
- Rpn nrpn gm 1 2 sysex other messages 11
- Saving a setup 11
- Setting toggle values for the buttons 11
- Viewing the contents of a memory 11
- As you can see from the screenshot of the librarian on page 20 you can save load receive or send the complete content to and from either bank columns to transmit the complete content of your evolution x session to the librarian simply press the receive button on the librarian software this process can only be completed successfully if the usb drivers for your x session have been selected correctly as described in the setting up the librarian software section once you have received data from the x session the memories are displayed in the column 12
- Assigning rpn nrpn to a controller 12
- Before you start using the librarian check that the x session has been selected as input and output device 1 select midi setup from the options menu 2 ensure the usb driver for you r evolution x session is selected in the inputs column if you are using native drivers this may be named usb audio device 1 in the outputs column select the usb driver for you r evolution x session if you are using native drivers this may be named usb audio device you should now be ready to use the librarian software with you evolution x session 12
- Librarian overview 12
- Organising presets received from a device 12
- Setting up the librarian software 12
- You can name the memories as you like to re name a memory double click on the memory you can then move memories around by dragging them to a new position or using the copy buttons between the two windows these buttons are defined below will copy the selected memory in bank 2 to bank 1 will copy the selected memory in bank 1 to bank 2 will copy all memories in bank 2 to bank 1 will copy all the memories in bank 1 to bank 2 will undo the last copy you made only the last copy is remembered it s a good idea to decide which column is your master column to avoid confusion and maybe loosing hours of work 12
- About sys ex messages device id 13
- About the evolution librarian software 13
- Assigning a note to a button 13
- Installing the evolution librarian software 13
- Assigning a device id to the x session 14
- Memory dump 14
- Non volatile memory 14
- Resetting to the factory default setting 14
- The evolution librarian software 14
- Midi in out midi messages explained 15
- Sys ex explained 15
- About the midi in port 16
- About the midi out port 16
- Midi in midi out signal flow diagram 16
- Program bank changes explained 16
- Rpn nrpn s explained 16
Похожие устройства
- M-Audio Venom Краткое руководство
- M-Audio Venom Руководство по эксплуатации
- M-Audio UC-33e Руководство пользователя
- M-Audio UC-33e Краткое руководство
- M-Audio UC-33e Руководство по эксплуатации
- M-Audio Session KeyStudio 25 Руководство пользователя
- M-Audio Session KeyStudio 25 Краткое руководство
- M-Audio Session KeyStudio Краткое руководство
- M-Audio Session KeyStudio Руководство пользователя
- M-Audio ProKeys Sono 88 Руководство по эксплуатации
- M-Audio ProKeys Sono 88 Краткое руководство
- M-Audio ProKeys Sono 88 Руководство пользователя
- Philips 47PFL9703D Краткое руководство
- Philips 47PFL9703D Руководство по эксплуатации
- Philips 37PFL9603D Руководство по эксплуатации
- Philips 37PFL9603D Краткое руководство
- Philips 42PFL9703D Руководство по эксплуатации
- Philips 42PFL9703D Краткое руководство
- Philips 42PFL9603D Краткое руководство
- Philips 42PFL9603D Руководство по эксплуатации