M-Audio X-Session UC-17 [12/16] Assigning rpn nrpn to a controller
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

M-Audio X-Session UC-17 [12/16] Assigning rpn nrpn to a controller

M-Audio X-Session UC-17 [12/16] Assigning rpn nrpn to a controller
Evolution X-Session Advanced User Guide
12
Note: For a detailed description of RPN/NRPN data see section RPN/NRPN’s
Explained on page 17.
1. Press Control select, and move the desired controller.
2. Press control assign twice and while the display is flashing,
enter controller 132 for RPN coarse, 133 for RPN fine, 134
for NRPN coarse or 135 for NRPN fine.
3. Press DATA MSB twice to assign the number for
the RPN/NRPN MSB.
4. Press DATA LSB twice to assign the number for
RPN/NRPN LSB.
5. Press CHANNEL ASSIGN to assign the MIDI channel the
message should be sent on.
You will find most data sheets for synths that make use of NRPN's will give the MSB
and LSB values that you should enter into DATA MSB and DATA LSB banks
(also see
Appendix F). However, some manuals may only give the hex values. The X-Session
requires you to enter the decimal value. You can easily convert hexadecimal values to
decimal using the windows calculator. Simply select Scientific mode, select hex and
enter the hexadecimal value you need to convert. Press the Dec button to convert it to
a decimal value. Enter the decimal value into the X-Session.
Alternatively, use the look up table in Appendix C.
The following shows how to set a button to transmit a note on when pressed, and a
note off when released.
Number MMC Command
01 STOP
02 PLAY
03 DEFERRED PLAY
04 FAST FORWARD
05 REWIND
06 RECORD STROBE
07 RECORD EXIT
08 RECORD PAUSE
09 PAUSE
10 EJECT
11 CHASE
12 COMMAND ERROR RESET
13 MMC RESET
Assigning RPN/NRPN To A Controller
21
Evolution X-Session Advanced User Guide
Before you start using the Librarian, check that the X-Session has been selected as input
and output device.
1. Select MIDI Setup from the Options menu.
2. Ensure the USB driver for you
r Evolution X-Session - is selected in the
“Inputs” Column.
If you are using native drivers this may be named “USB Audio Device”.
1. In the “Outputs” column, select the USB driver for you
r Evolution X-Session
If you are using native drivers this may be named “USB Audio Device”.
You should now be ready to use the Librarian software with you Evolution
X-Session.
As you can see from the screenshot of the Librarian on page 20, you can save, load,
receive or send the complete content to and from either Bank columns.
To transmit the complete content of your
Evolution X-Session to the librarian,
simply press the “Receive” button on the Librarian software.
This process can only be completed successfully if the USB drivers for your
X-Session
have been selected correctly, as described in the “Setting Up The Librarian Software”
section.
Once you have Received data from the
X-Session, the memories are displayed in the
column.
You can name the memories as you like. To re-name a memory, double-click on the
memory. You can then move memories around by dragging them to a new position, or
using the copy buttons between the two windows.
These buttons are defined below:
Will copy the selected memory in Bank 2 to Bank 1.
Will copy the selected memory in Bank 1 to Bank 2.
Will copy all memories in Bank 2 to Bank 1.
Will copy all the memories in Bank 1 to Bank 2.
Will undo the last copy you made. Only the last copy is remembered.
It’s a good idea to decide which column is your master column, to avoid confusion and
maybe loosing hours of work.
Setting Up The Librarian Software
Librarian Overview
Organising Presets Received From A Device

Содержание

Похожие устройства

Скачать