Gigabyte GA-8I915P-G (rev. 2.x) [3/18] 2 configuring gigaraid controller mode and boot sequence in bios setup

IDE RAID Drives Configuration (GigaRAID)- 3 -

Figure 1

(2) Configuring GigaRAID controller mode and boot sequence in BIOS Setup

You have to make sure whether the GigaRAID controller are configured correctly in system BIOS Setup

and set BIOS boot sequence for the IDE RAID hard drive(s).

Step 1:

Turn on your computer and press Del to enter BIOS Setup during POST (Power-On Self Test). If you want

to create RAID, assure that the Onboard H/W GIGARAID item under Integrated Peripherals is set

to Enabled and GigaRAID Function to RAID (Figure 1). If you do not want to create RAID, set GigaRAID

Function to ATA.

Integrated Peripherals



: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help

F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

The BIOS Setup menus described in this section may not show the exact settings for your

motherboard. The actual BIOS Setup menu options you will see shall depend on the motherboard

you have and the BIOS version .