Bomann VS 194 104L [19/30] Aintenance
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Bomann VS 194 104L [19/30] Aintenance

Bomann VS 194 104L [19/30] Aintenance
8
01/2012
• Do not install the device near stoves, heaters or other heat sources. In case of higher ambient
temperatures, the compressor will run more frequently and longer.
• Ensure sufficient ventilation at the bottom and rear side of the device.
Never block any ventilation openings.
• Allow warm dishes to cool down before putting them in the device.
• Do not open the door longer then necessary.
• Only set the temperature as low as needed. The ideal temperature in the fridge is 7°C.
It should be measured in the upper shelf, as far as possible in the front.
• Always keep the condenser – metal grid on the rear side (if existing) – clean.
• Make sure the door sealing is in good order for the door to close properly.
MAINTENANCE AND CLEANING
Cleaning and care
For hygienic reasons, clean the interior and accessory parts regularly.
WARNING
• Always disconnect the plug or turn off/ unscrew the fuse before cleaning. Pull the plug and not the
cable.
• Do not use steam cleaners for cleaning the device; moisture could enter electrical components.
Risk of electric shock! Hot steam could damage the plastic parts. The device must be dry before
restarting operation.
• Essential oils and organic solvents, such as the juice of lemon or orange skin, butanoic acid or
cleaning agents containing acetic acid can damage plastic parts. Prevent contact of any part with
such substances. Do not use abrasive cleaning agents.
Pls. do as follows:
• Remove all food and keep covered at a cool location.
• Use warm water and a mild detergent for cleaning the interior (including rear side and bottom).
• Check the discharge opening.
• After thorough drying, restart operation.
• Clean the condenser - metal grid on the rear side (if existing) once a year, using a soft brush or
vacuum cleaner.
WARNING
Do not bend the cooling coils.
Do not use arenaceous abrasives.
Reverse the bulb
Lamp specifications: 220-240V, max. 15W
To turn off the device, set the temperature control to setting 0 - OFF.
Disconnect the plug or turn off the fuse!
• Remove the screw from the lamp cover.
• Press on the lamp cover and remove to the back.
• Replace defect illuminant.
• Reattach the lamp cover and fasten the screw.
• Reconnect the device and turn on.
Repairs
WARNING
Servicing of electric devices must be conducted by qualified experts only. Incorrect or improper repairs
constitute a risk for the user and will void the warranty!
What if . . . Troubleshooting
The design of the device ensures a trouble-free operation as well as a long life cycle. Nevertheless, if
any defect occurs during operation, please check if it is caused by improper operation.

Содержание

Похожие устройства

Скачать