Hitachi UR18DSL [8/64] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Hitachi UR18DSL [8/64] English

Hitachi UR18DSL [8/64] English
7
English
● Auto Select
Press the or
search button to automatically search for
stations with strong radio waves.
When a station is detected, the radio plays for 3 seconds.
Press the search button before the next search starts to
continue listening to the detected radio station.
● Manual Select
Turn the select dial to fi nd the station you want to listen to.
● Save (Memory)
Find the station that you want to save.
Press and hold down the memory button (1 to 5) for more
than 2 seconds to save the setting.
The
MEMORY
indicator appears at the bottom left of the
display panel and the number of the assigned memory button
is displayed below that.
You can save 5 AM and 5 FM stations in the memory buttons
1 to 5.
To select the saved station, press the memory button
corresponding to the saved
number.
● For Better Reception
FM (Fig. 6)
Adjust the length, direction and angle of the antenna to
ensure the best reception.
When tuned in to an FM stereo broadcast,
STEREO
is
displayed.
If a lot of noise occurs during an FM stereo broadcast, press
the FM mode / Alarm button.
The radio switches to monaural (the
STEREO
indicator
turns off ) to reduce the noise. To return to stereo reception,
press the FM mode / Alarm button again.
AM (Fig. 7)
The radio has a built-in antenna. Turn the radio around to fi nd
the direction with the best reception.
Positioning
Reception may be poor when the radio is
used inside a
vehicle or building. When inside a building, place the radio
near the window to ensure better reception.
Noise may occur if the radio is placed near an appliance that
generates noise. Move the radio away from the source of the
noise.
● Auto Power Off
The radio turns off automatically after 8 hours.
USING THE TIMER FUNCTION
○ The radio turns on/off at the preset time
○ Use the radio as an alarm clock
● Sleep Timer
Setting the sleep timer turns the radio off after the set time
has elapsed.
1. Pressing the sleep timer / clock button while the
power is turned on displays the
SLEEP
indicator.
The time (minutes) indicator changes in order of
[90→80→70→...→10→OFF] in 10-minute units each time
the button is pressed.
2. Press the button repeatedly until the desired time is
displayed.
3. The radio turns off when the set time has elapsed.
4. To cancel the timer,
press the sleep timer / clock button
until the indicator is set to OFF.
The
SLEEP
indicator goes off and the sleep timer is
cancelled.
To check the remaining time
The
SLEEP
indicator is displayed when the sleep timer
has been set.
Press the sleep timer / clock button to check the remaining
time on the timer.
● Buzzer Alarm / Radio Alarm
NOTE
○ The volume of the buzzer alarm cannot be adjusted.
○ If the rechargeable battery is running low, the radio alarm
timer may not work.
Charge the battery before setting the timer or use the AC
adapter.
○ The radio alarm turns on in the station and at the volume
selected
before the timer was set. Set the volume and
time to avoid creating a disturbance when the radio turns
on.
When the alarm time is set and the buzzer alarm is selected,
the buzzer sounds at the preset time.
When the radio alarm is selected, the radio turns on in the
selected radio station at the preset time.
1. Set the time with the radio turned off .
2. Press and hold the FM mode / alarm button for more than
2 seconds to switch to alarm mode.
The
ALARM
indicator is displayed.
3. The “hour” indicator blinks. Turn the select dial or press
the search button to select the desired “hour”.
Press the FM mode / alarm button to set the “hour”. The
“minutes” indicator blinks. Turn the select dial or press
the search button to select the desired
“minutes”.
4. Press the FM mode / alarm button to save the set time.
The
ALARM
indicator goes off .
5. The display changes in order of [buzzer alarm→radio
alarm→no display] each time the FM mode / alarm button
is pressed.
6. The power turns on and the buzzer sounds or the radio
plays when the preset time is reached.
Buzzer Alarm
To turn off
the buzzer alarm, press the FM mode / alarm
button. If it is not turned off , the buzzer will continue to sound
for 1 minute and then stop.
Radio Alarm
To turn off the radio, press the power button. If it is not turned
off , the radio will
continue to play for 30 minutes.
To check the alarm
To check the time set on the alarm, press the band selector
button with the power turned off .
OTHER FUNCTIONS
● Connecting an External Device
You can use the radio to listen to an MP3, MD or CD player.
1. With the radio and the external device both turned off ,
connect the audio cord (ø3.5 mm, available at an electric
store) of the external device to the external input (AUX
IN) terminal on the side
of the radio.
2. Turn on the radio and press the band select button to
display [AUX].
NOTE
○ The display changes in the order of [FM→AM→AUX→FM]
each time the band select button is pressed.
3. Turn on the external device to start listening.
4. Adjust the volume.
5. To disconnect
the external device, turn off the device and
the radio before removing the audio cord.
● Using Headphones
You can use headphones or earphones purchased from an
electric store to listen to the radio.
CAUTION
○ Be sure to turn the volume down before connecting the
headphones or earphones.
00_UR18DSL_EE.indb 700_UR18DSL_EE.indb 7 2009/05/15 12:00:342009/05/15 12:00:34

Содержание

Похожие устройства

Скачать