Beon BN-211 [11/17] Instruction manual

11 INSTRUCTION MANUAL

BUTTONS DESCRIPTION

А.

В.

С.

Switch OFF/Reverse button

Switch ON button

Reset - motor lock button

BASIC PRINCIPLES OF WORKING WITH A MEAT GRINDER

 The meat grinder is designed for processing meat without bones only at home.

 Assemble the device and place it on a flat, dry surface.

 Make sure that the air vents on the housing are not blocked.

 Plug the power cord into an electrical outlet.

 Place suitable dishes under the grinder head.

 Make sure that the meat is completely thawed, remove excess fat and bones, and cut the

meat into cubes or strips so that they pass freely into the opening of the tray.

 Turn the device on by setting the switch to the «ON» position.

 Slowly push the meat into the mouth of the meat grinder head using the pusher. During

operation, use the push rod that is included in the delivery.

 It is forbidden to use any objects to push the meat, in any case do not push the meat with your

hands.

 Do not use excessive force to push through meat or other products.

 During chopping meat can form a deadlock, to resolve the resulting deadlock should use the

reverse rotation of the screw.

 Reverse screw rotation mode turns off the grinder by setting the switch to the "0" position,

then press and hold the switch to the «R» position.

 The continuous operation time of the product processing device must not exceed 10 minutes.

 After 10 minutes of continuous operation, turn off the device and allow it to cool for 30

minutes, after which you can continue working.

 As soon as you finish working, turn off the meat grinder by setting the switch to the "0"

position, disconnect the meat grinder from the power supply, and only then start

disassembling it.

PREPARATION FOR WORK

 The device is intended for preparing minced meat.

 Wash all parts of the meat grinder that will come into contact

with food (except the body) with warm water and detergent.

 Before connecting the appliance to the mains, make sure that

it is switched off.

Assembly

 Place the meat grinder on a flat, horizontal surface.

 Press the attachment button, attach the set-top box to the

electric drive (when inserting the set-top box, note that it is

tilted according to the arrow shown at the top in figure 1,