Black & Decker KX1650 [6/64] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Black & Decker KX1650 [6/64] English

Black & Decker KX1650 [6/64] English
6
ENGLISH
♦ Children should be supervised to ensure that
they do not play with the appliance.
Residual risks.
Additional residual risks may arise when using the
tool which may not be included in the enclosed
safety warnings. These risks can arise from misuse,
prolonged use etc.
Even with the application of the relevant safety
regulations and the implementation of safety de-
vices, certain residual risks can not be avoided.
These include:
♦ Injuries caused by touching any rotating/
moving parts.
♦ Injuries caused when changing any parts,
blades or accessories.
♦ Injuries caused by prolonged use of a tool.
When using any tool for prolonged periods
ensure you take regular breaks.
♦ Impairment of hearing.
♦ Health hazards caused by breathing dust
developed when using your tool (example:-
working with wood, especially oak, beech
and MDF.)
Labels on tool
The following pictograms are shown on the tool:
Warning! To reduce the risk of injury, the
user must read the instruction manual.
Electrical safety
This tool is double insulated; therefore no
earth wire is required. Always check that the
power supply corresponds to the voltage on
the rating plate.
♦ If the supply cord is damaged, it must be re-
placed by the manufacturer or an authorised
Black & Decker Service Centre in order to avoid
a hazard.
Extension cables
♦ A 2 or 3 core cable may be used as the appliance
is double insulated and of class II construction.
♦ Up to 30m (100 ft) can be used without loss of
power.
Features
This tool includes some or all of the following
features.
1. On/off switch
2. Nozzle
Assembly
Warning! Before assembly, make sure that the tool
is switched off and unplugged.
Fitting an accessory
A selected range of accessories can be obtained
from your local retailer.
• Cone nozzle: Concentrates the air stream
on a smaller area.
• Fish tail: Spreads the air stream over
a wider area
• Spoon refl ector: For soldering pipes.
• Glass protector: For the protection of glass
during paint stripping.
• Scraper: For the removal and stripping paint
and varnish.
♦ Fit the connecting piece of the accessory over
the nozzle (2).
Use
Switching on and off
♦ To switch the tool on at the low air speed, low
heat, set the on/off switch to position I.
♦ To switch the tool on at the high air speed, high
heat, set the on/off switch to position II.
♦ To switch the tool off, set the on/off switch to
position O.
Using the tool
Your tool is fi tted with a thermostat for your safety.
Using the tool continuously for very long periods
or other severe duty cycles may cause the tool to
overheat and stop working. It is therefore recom-
mended that you allow the tool to cool down at
regular intervals during use.
♦ Allow the tool to heat up for a few seconds before
use.
♦ At fi rst use some smoke may emit from the noz-
zle. This is normal and will soon decrease.
♦ Use a low temperature setting for drying paint
and varnish, removing stickers, shrinking insula-
tion tubes, and thawing frozen pipes.
♦ Use a high temperature setting for removing
paints and lacquers, and soldering plumbing
joints.
♦ If you are unsure about using this tool on a par-
ticular material, start with a low temperature
setting and perform a test on scrap material.
Hands free use (fi g. A)
The tool has stand locations (3) to facilitate hands
free use.
♦ Place the tool with the nozzle up on a surface
where it cannot be tipped over.

Содержание

Похожие устройства

Скачать