Acme DP02 [56/202] Ftp server configuration

3.12.1 FTP Server Configuration

- YoucanconfiguretheusernameandpasswordoftheFTPServer.Ifyouwish

todoso,pleasereferto‘3.1.5 Network setup’.

On your product,

- Assign a manual Fixed IP address for the product, for example 192.168.0.9

whenyouconnecttoyourroutereitherviawiredorwirelessconnection.

- Assign the same subnet mask as your router, usually 255.255.255.0 and the

gatewayofyourrouter(router’slocalIPaddress,usually192.168.xxx.xxx).

Please refer to your router documentation on getting this information from your

router.

- KeyinyourrouterDNSIPaddress(primaryorsecondary)

On your router,

- ConfigureFTPServerwithinyourrouter’sVirtualServersettingandkeyinthe

above IP address in example, 192.168.0.9 and change the public port to 21

andprivateportto21whichisbydefault.

- Foryourconvenience,youcanalsochoosetoenableDynamicDNSandsign

upforafreeDDNSdomainatanyofthewebsiteprovidingsuchfreeservices.

Anexamplewouldbewww.dyndns.com

- Atyourrouter’sDDNSpage,keyinyourhostnameandenterthesameuser

nameandpasswordwhenyoucreateaDDNSaccount.Pleaserefertoyour

router documentation on getting this information from your router.

3.12.2 Accessing from a FTP program

Using your favourite FTP application on your PC, an example would beALFTP,

whichcanbedownloadedfromhttp://www.altools.com/ALTools/ALFTP.aspx

At the FTP program connection page, you can either connect using your router’s

WANIPaddressorviayourDDNShostname.

BesuretostarttheFTPservicewithyourUserNameandPasswordasdiscussed

atFTP,‘3.1.5 Network setup’