Home
Главная
Vitek
Кофеварка рожкового типа
VT-1518
Инструкция по эксплуатации Страница: 6

Vitek VT-1518 [6/32] English

ENGLISH

– Slightly tamp the ground coffee in the filter

(10), you can do it with the back side of the

measuring spoon (11).

– Coffee strength depends on the quality and

grinding degree of coffee beans. If coffee is

pouring out too long, this means the coffee

powder is too fine or it is tamped too strongly.

REMOVING MINERAL SCALE

1. For effective operation of the coffee maker

it is necessary to clean (descale) the cof-

fee maker from mineral deposits every

2-3 months.

2. Fill the water tank with citric acid solution. It is

recommended to dissolve 30 g of citric acid

in 1 l of water.

3. Install the coffee filter (10) into the holder

(6), do not add ground coffee to the filter

(10). Install the filter holder (6) into the coffee

maker. The holder (6) ledges should match

the grooves on the boiler, after that turn the

filter holder (6) handle (8) to the right until

bumping «LOCK» (pic. 2).

4. Place a suitable cup on the tray (9), switch

the coffee maker on by setting the opera-

tion mode switch (2) to the position « »,

the light indicator (3) will light up and the

heating element will be switched on. After

30-40 seconds set the switch (2) to the posi-

tion «RELEASE OFF». Wait for 10-15 minutes

and switch the water supply on by setting the

switch (2) to the position « ». Wait until the

descaling agent release stops completely.

5. If necessary, repeat the descaling process.

6. Set the operation mode switch (2) to the posi-

tion «RELEASE OFF» to switch the coffee

maker off and to release the pressure. Unscrew

the lid (1) and fill the tank with clean water.

7. Switch the coffee maker on by setting the

operation mode switch (2) to the position

« », the light indicator (3) will light up, the

heating element will switch on and the water

will start pouring into the cup. Wait until the

water release stops completely. Repeat the

washing several times.

CLEANING

• If during the filter (10) cleaning you find out

that the openings are blocked with the ground

coffee remnants, you can clean them with a

small brush.

• Clean the coffee maker body with a soft,

slightly damp cloth and then wipe it dry. Do

not use metal brushes, abrasives and solvents.

• Do not immerse the coffee maker body into

water or any other liquids.

• Wash the removable parts of the coffee maker

with warm water and mild detergent, then

rinse them and dry.

Drip tray (9)

– Remove the tray (9) and pour the water out of it,

wash the tray (9) and install it back to its place.

STORAGE

– Before taking the unit away for storage, unplug

it and let the unit cool down completely.

– Clean the unit.

– Do not leave, use and keep the coffee maker

in places with the temperature below 0°C.

– Keep the unit in a dry cool place away from

children and disabled persons.

Troubleshooting

Problem Cause Solution

The coffee maker

can‘t be switched

No voltage in the mains socket.

The power plug is not completely

inserted into the socket.

Make sure that the mains socket is

operating.

Check whether the plug is completely

inserted into the socket.

Water leaks from

the lower part

of the coffee

maker

The water tray is full. Pour the water out of the tray

Coffee leakage

from

the filter holder

Loose connection of filter and boiler

gasket, ground coffee got on the

edges of the filter.

Clean the edges of the filter.

IM VT-1518.indd 6 12/24/19 12:17 PM

Vitek VT-1518 [6/32] English

Содержание

Похожие устройства