Grundig GIGL 7265250 T [16/92] Gas connection

Содержание

Похожие устройства

Connection must comply with national regulations The mains supply data must correspond to the data specified on the type label of the product Type label is at the rear housing of the product Power cable of your product must comply with the values in Technical specifications table Before starting any work on the electrical installation disconnect the product from the mains supply There is the risk of electric shock O Power cable plug must be within easy reach after installation do not route it above the hob O While performing the wiring you must apply with the national local electrical regulations and must use the appropriate socket outlet line and plug for oven In case of the product s power limits are out of current carrying capability of plug and socket outlet line the product must be connected through fixed electrical installation directly without using plug and socket outlet line Plug the power cable into the socket Gas connection Product can be connected to gas supply system only by an authorised and qualified person or technician with licence Risk of explosion or toxication due to unprofessional repairs Manufacturer shall not be held responsible for damages arising from procedures carried out by unauthorised or unlicensed persons 16 EN A Before starting any work on the gas installation disconnect the gas supply There is the risk of explosion Gas adjustment conditions and values are stated on labels or on type label Your product is equipped for natural gas NG Natural gas installation must be prepared before installing the product There must be a pipe Piping advised to be buyed from a licensed installer must comply with local gas standard at the outlet of the installation for the natural gas connection of your product and the tip of this pipe must be closed with a blind plug Service Representative will remove the blind plug during connection and connect your product by means of a straight connection device coupling Make sure that the natural gas valve is readily accessible A If you need to use your product later with a different type of gas you must consult the Authorised Service Agent for the related conversion procedure Leakage check at the connection point Make sure that all knobs on the product are turned off Make sure that the gas supply is open Prepare soapy foam and apply it onto the connection point of the hose for gas leakage control Soapy part will froth if there is a gas leakage In this case inspect the gas connection once again Instead of soap you can use commercially available sprays for gas leak check

Скачать