Grundig GIGL 7265250 T [18/92] Gas conversion

Содержание

Похожие устройства

In order to change your appliance s gas type change all injectors and make flame adjustment for all valves at reduced flow rate position Exchange of injector for the burners Place the burner plates burner plate caps and grills back to their seating after installation A A Making connections to different holes is not a good practice in terms of safety since it can damage the gas and electrical system There are gas and electrical components contained within this hob therefore when fitting the mounting springs clamps only attach the supplied fixings to the connection holes shown in this manual Failure to observe this advise may lead to life and property safety 1 Take off burner cap and burner body 2 Unscrew injectors by turning the counter clockwise 3 Fit new injectors 4 Check all connections for secure fitting and tightness New injectors have their position marked on their packing or injector table on Injector table page 12 can be referred to O O Varies depending on the product model On some hob burners the injector is covered with a metal piece This metal cover must be removed for injector replacement Final check 1 Open gas supply 2 Check gas installations for secure fitting and tightness 3 Ignite burners and check appearance of the flame O Flame must be blue and have a regular shape If the flame is yellowish check if the burner cap is seated securely or clean the burner Gas conversion A Before starting any work on the gas installation disconnect the gas supply There is the risk of explosion 18 EN 1 Flame failure device model dependant 2 Spark plug 3 Injector 4 Burner O Unless there is an abnormal condition do not attempt to remove the gas burner taps You must call an Authorised service agent or technician with licence if it is necessary to change the taps

Скачать