Beurer FT70 [21/76] Getting started 4

Getting started4

The batteries are already inserted in all new devices. Before ﬁrst use, remove the protruding plastic insulating

strip from the battery compartment. The thermometer will then switch on automatically.

Setting the device5

Set the unit in which the temperature will be displayed, the date and the time

888

1-1

00:00

Press the button for 1 second to switch the thermometer on. The device

performs a brief self test: all elements of the display are shown for approx.

1 second. Following a successful self test, the device emits two short beeps.

In Standby mode, the date and time are shown and “--” is displayed.

When the thermometer is used for the ﬁrst time, and each time the batteries are changed, the date and time

are displayed in the format 1-1 00:00 during the basic set-up (after the self test). Now set the unit in which

the temperature will be displayed, the date and the time. To set the device, proceed in stages: unit – year –

month – day – hours – minutes.

Press the •

button for approx. 3 second to access the Set mode.

The setting to be changed will ﬂash in turn.

Press the • button again to save the setting or

press the • button to change the setting.

Then press the • button to save the setting.

After this process, the thermometer shows the word “OFF” in the display and switches o automatically.