Beurer FT70 Инструкция по эксплуатации онлайн [24/76] 80632

Press the • button for 1 second to switch the thermometer on.

Following a successful self test, the device emits two short beeps.

Remove the cap by gently pushing it up (1) and then pulling it o •

forwards (2).

Make sure that the sensor tip and also the ear canal are clean.

As the ear canal is slightly curved, you have to pull the ear slightly up and

backwards before inserting the sensor tip. This is important so that the sensor

tip can be pointed directly at the eardrum.

Insert the sensor tip carefully and press the • button for 1 second.

Release the • button. The end of the measuring time is signalled with a

short beep and the measured value appears on the display.

If the measured value is within the normal range (< 100.4°F/38°C), the green

LED lights up for 3 seconds. If the measured value is higher (≥ 100.4°F/38°C,

high temperature), the red LED is illuminated.