Karcher K 7.85 M [13/196] Commissioning and operation

Karcher K 7.85 M [13/196] Commissioning and operation
English 13
Definition of abbreviations used:
HP = High pressure
DT = Detergent
When unpacking the product, make sure
that no accessories are missing and that
none of the package contents have been
damaged. If you detect any transport dam-
ages please contact your dealer.
Illustrations on Page 2
1 Transport handle
2DT tank
3DT tank
4 DT metering regulator
5 Accessory compartment
6 Storage, hand-spray gun
7 ON/OFF switch for appliance
8 HP hose drum with handle
9 Water connection
10 Fine filter in the water connection
11 Coupling element for water connection
12 Spray lance with 4-part nozzle
13 Washing brush
14 HP hose
15 Handgun with safety catch
16 Power cord with plug
17 Storage, power cord
Figures 1 -10
Î Attach the lose individual parts to your
high pressure cleaner.
Figure 11
Î Join HP hose and handgun together.
Î Push clip in until it engages and check
that it is securely fastened by pulling on
the HP hose.
The appliance is not suited for use
in the drinking water supply net-
work. It is necessary to install a
suitable system separator from
Kärcher, if the device is to be used in the
drinking water supply network.
For connection values, see type plate/tech-
nical data.
Observe regulations of water supplier.
Î Use a fibre-reinforced hose (not included)
with a standard coupling:
- Minimum diameter, 1/2 inches (13 mm).
- Minimum length, 7.5 m.
Î Screw the coupling unit (supplied) to the
water connection on the appliance.
Î Push the water supply hose onto the
coupling unit, then connect it to the tap.
Caution
Never operate the high-pressure cleaner
when the tap is turned off as dry running will
damage the HP pump.
If the water supply is not clean, the Kärcher
water filter must be used (special accessory
- order No. 4.730-059).
When fitted with the appropriate accesso-
ries, this high-pressure cleaner can draw in
surface water, e.g. from water butts or
ponds (max. suction height 0.5 m).
Î As the standard coupling system is not
suitable for use in suction mode, the
Kärcher suction hose with integrated fil-
ter should be used instead (special ac-
cessory, order no. 4.440-238) and
suspended inside the water butt.
Commissioning and
operation
Description of the Appliance
Before Startup
Water supply
Water supply from mains
Drawing in water from open reservoirs

Содержание