Karcher K 7.85 M [14/196] Start up

Karcher K 7.85 M [14/196] Start up
14 English
Î Use the Kärcher water filter to protect
the HP pump and accessories (special
accessories, order no. 4.730-059). This
filter removes dirt from incoming water.
Î Appliance ventilation: Switch on the ap-
pliance without connection the HP hose
and run it until the water discharging
from the HP outlet is free of bubbles.
Switch off appliance and reconnect HP
hose.
Note: The appliance deaerates faster if
you first fill the suction hose with water.
Î Unwind the high pressure hose fully
from the hose drum.
Î Push the appropriate spray lance on to
the handgun and fasten it by turning it
through 90°.
Î Open tap.
Î Plug in the mains plug.
Î Set main switch to “I/ON”.
Î Press safety catch on the handgun to
release it and pull lever.
Risk of injury
The handgun is subjected to a recoil force
when the water jet is discharged. Make sure
that you have a firm footing and are also
holding the handgun and spray lance firmly.
Î To select the jet type, release the lever
on the handgun and rotate the nozzle
head until the symbol corresponds with
the marking on the spray lance. During
operation, this marking must be facing
upwards.
Low-pressure flat jet
for operation with detergents or for low-
pressure cleaning
High-pressure round jet
for particularly stubborn stains
High-pressure flat jet
for large areas of dirt
High-pressure rotary round jet
for large areas of stubborn dirt
Note
Detergent can only be added when the ap-
pliance is being operated in low pressure
mode.
All washing brushes supplied by Kärcher
are designed for use with detergents.
Î Set 4-part nozzle to low-pressure flat jet
.
Î Fill DT tank with DT tab and water or DT
concentrate and water (follow dosage
recommendations on the labels of the
detergent).
Note:There is an info-card enclosed with
your appliance; this lists all the detergents
approved by Kärcher. From this info-card
separate the product cards of the deter-
gents that you will fill in your detergent tank
In the detergent tanks, you will find pockets
where you can insert, for notifying purpos-
es, the product card of the detergent you
have filled in.
Î Turning the regulator to the left: Deter-
gent is added from the left DT tank.
Î Turning regulator to the right: Detergent
is added from the right DT tank.
1 Spray the detergent sparingly on the dry
surface and allow it to react, but not to
dry.
2 Spray off loosened dirt with the high-
pressure ray.
We recommend the Kärcher cleaning and
care program that will match the respective
cleaning requirements. Please seek con-
sultation or request information on the sub-
ject.
Start up
High pressure operation
Spray lance with 4-part nozzle
Operation with detergent
DT suction infeed from DT tank
DT metering regulator
Recommended cleaning method
Detergent

Содержание