Dewalt DCGG571NK-XJ без АКБ и ЗУ [15/48] Cleanin

Dewalt DCGG571NK-XJ без АКБ и ЗУ [15/48] Cleanin
13
ENGLISH
Cleaning Contaminants from the Grease Gun
Cleaning Contamination from the Check Valve (Fig.L)
Should the grease gun fail to dispense grease, the check
valve
25
should becleaned.
1. Remove the check valve plug
28
, then the disc
31
,
spring
30
and check valve ball
29
.
2. Clean the ball
29
and the check valve area in the
maincasting.
3. Reinstall the ball
29
, the spring
30
, and then the disc
31
.
4. After all grease is cleaned from the area, reinstall the check
valve plug
28
.
Cleaning Contamination from the Filter (Fig.A,G,M)
Should the grease gun fail to dispense grease, clean the
filter
22
.
NOTE: If there is still grease in the tube, open the purge valve
prior to pulling the tubehandle.
1. Pull the grease tube handle
12
out as far as it will go, then
secure the grease tube rod
13
into the retaining slot
15
by
moving the rod to the side. Ensure the rod is placed securely
in the slot to prevent it fromdisengaging.
2. Unscrew the grease tube assembly
14
from the grease gun
andremove.
3. Using a small flat-blade screwdriver or pick, carefully pop
out thefilter.
4. Wipe off the filter using a soft cloth. If the filter still has
debris in it after wiping, a soft brush or swab may beused.
5. Once clean, reinsert the filter into the round groove,
ensuring it is fully seated, and reattach the grease tube
assembly to the greasegun.
Cleaning
WARNING: Blow dirt and dust out of the main housing
with dry air as often as dirt is seen collecting in and around
the air vents. Wear approved eye protection and approved
dust mask when performing thisprocedure.
WARNING: Never use solvents or other harsh chemicals
for cleaning the non‑metallic parts of the tool. These
chemicals may weaken the materials used in these parts.
Use a cloth dampened only with water and mild soap.
Never let any liquid get inside the tool; never immerse any
part of the tool into aliquid.
MAINTENANCE
Your power tool has been designed to operate over a long
period of time with a minimum of maintenance. Continuous
satisfactory operation depends upon proper tool care and
regularcleaning.
WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack
before making any adjustments or removing/
installing attachments or accessories. An accidental
start‑up can causeinjury.
The charger and battery pack are notserviceable.
Using the Grease Gun (Fig.A)
WARNING: To reduce the risk of serious personal
injury, always maintain a grip on the handle when
operating the grease gun or positioning the hose
ontofittings.
To operate the grease gun, hold the grease gun by the
handle
3
, or place it on a stable surface upright on its rubber
feet
18
maintaining a grip on the handle. Holding the hose
by the flexible hose safety spring guard
8
, connect the flexible
hose grease coupler
9
or other appropriate grease coupler,
onto the grease fitting to be filled. Carefully depress the variable
speed trigger switch to begin the filling process. Once the
correct amount of grease has been dispensed, release the
trigger and remove the coupler from the grease fitting. If the
coupler does not release, there may still be residual pressure in
the line. Moving the coupler from side to side can relieve the
residual pressure so it can be removed from the coupling. If
the coupler leaks excessively or does not hold on to the grease
fitting, it should bereplaced.
Proper hand position requires one hand on the flexible hose
safety spring guard
8
with the other hand on the handle
3
asshown.
Lubrication
Your power tool requires no additionallubrication.
Proper Hand Position (Fig. A, K)
WARNING: To reduce the risk of serious personal injury,
ALWAYS use proper hand position asshown.
WARNING: To reduce the risk of serious personal
injury, ALWAYS hold securely in anticipation of a
suddenreaction.
OPERATION
Instructions for Use
WARNING: Always observe the safety instructions and
applicableregulations.
WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack
before making any adjustments or removing/
installing attachments or accessories. An accidental
start‑up can causeinjury.

Содержание

Похожие устройства

Скачать