Denzel BLG-IB-18-02 [6/32] Additional security rules when working with angle grinder
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Denzel BLG-IB-18-02 [6/32] Additional security rules when working with angle grinder

Denzel BLG-IB-18-02 [6/32] Additional security rules when working with angle grinder
6
RECHARGEABLE ANGLE GRINDER WITH BRUSHLESS MOTOR
EN
Maintenance
Your electric tool must be repaired only by qualied specialists using original spare parts. This will ensure safety
and reliability of your electric tool in further use.
Special Security Rules when working with cordless Angle Grinder:
a) Battery charge should be done using the charger specied by the manufacturer (supplied). Charger suitable
for one type of battery may cause re when using a dierent type of battery;
b) Power supply of machines should be carried out only from rechargeable batteries compatible with this model
of machine and recommended by the manufacturer. Using any other batteries may cause damage and re;
с) If the battery is not used keep it separate from the machine and metal objects such as paper clips, coins, keys,
nails, screws, etc. that can accidentally close the contact pins. Short circuit of the contact pins of the battery may
cause burns or re;
d) The machine has an independent power source (battery) and always ready to go. Avoid accidentally pressing
the switch — it may cause injury and other damage.
e) Do not open the battery; there is danger of a short circuit, which could cause re or explosion.
f) Protect the battery from high temperatures, prolonged exposure to direct sunlight and re. There may be an explo-
sion hazard.
g) When performing operations in which the contact of fasteners (twisted screws or screws) with hidden wiring
is possible, hold the machine only on insulated surfaces designed to hold by hand. When they come into
contact with the live wire, accessible metal parts of the machine are energized, whereby the operator may
be shocked by electrical current.
h) The workpiece must be xed in the clamping devices or vice, thus, it is held more securely than in the hands.
Additional Security Rules when working with Angle Grinder
General warning instructions for grinding
a) Angle grinders are designed for grinding with abrasive wheels, sandpaper, for works with wire brushes
and as a detachable grinder. Observe all warnings and instructions that you get with a power tool. Failure
to follow directions may result in electric shock, re and / or serious injury.
b) Do not use tooling or accessories which are not provided by the manufacturer specically for this type of tool
and not recommended by the manufacturer. Only the physical ability to attach a tooling on your power tool
does not guarantee its safe and reliable use.
c) Allowable tooling speed must be at least the maximum number of revolutions specied on the electric machine.
Tooling, rotating with greater than acceptable speed, may tear o and cause serious injury.
d) The outer diameter and thickness of the tooling must match the size of your electric machine. Tooling of the wrong
size cannot be safe to operate and properly monitored.
e) Grinding wheels, anges, grinding plates or other accessories must t tightly on the spindle of your electric machine.
Tooling mounted on the spindle with backlash leads to strong vibration and loss of control over the machine.
f) Do not use damaged tooling to avoid serious injury. Each time before use check grinding wheels for chips
and cracks, grinding plates for cracks, risks or heavy wear, wire brushes on loose or broken elements.
g) Use personal protective equipment. Depending on the work performed use a face shield, eye protection
or protective glasses. If necessary, use a dust respirator, hearing protection, protective gloves or a special apron
which protects against sparks, abrasive particles and material particles.
h) Ensure that unauthorized persons are at a safe distance from the work area. Shards of parts or tooling, in case
of its rupture, can y to the side and cause injury even at the considerable distance from the work site.
i) Never let an electric machine out of your hands, until the tooling stops completely. Rotating tooling can catch
on supporting surface or other object and, as a result, you may lose control of the electric machine.
j) Regularly clean the vents of the electric machine. The engine fan draws dust into the case and large amounts
of metallic dust can cause the tool to fail.
k) Do not use accessories that require the use of coolants. The use of water or other coolants can cause damage
to the electric machine and electric shock.

Содержание

Похожие устройства

Скачать