Denzel BLG-IB-18-02 [7/32] Residual risks

RECHARGEABLE ANGLE GRINDER WITH BRUSHLESS MOTOR

l) Hold the electric machine tight and take a position in which you can counteract the reverse forces. Always use

the extra handle to best counteract reverse forces or the reactionary moment of recruitment.

m) Be especially careful on corners, sharp edges, etc. Prevent a tooling bounce from the workpiece and its jam-

ming. A possible rebound and jamming of the tooling causes loss of control or kickback.

n) Use dust suction when processing stone. The vacuum cleaner must be adapted to work with stone dust. Using

these devices reduces the risk of exposure to dust.

Special warnings for grinding and cutting

a) Use abrasive tools recommended exclusively for your electric machine and protective covers provided for them.

Abrasive tools not provided for this electric machine may not be safe enough.

b) The protective cover must be securely fastened to the machine and congured to achieve the highest degree

of security, it means, in the direction of the operator should be open as little as possible part of tooling. The pro-

tective cover should protect the operator from splintering and accidental contact with the tooling.

c) Abrasive tools may only be used for their intended purpose. Never grind by the side of the cutting disc. Cutting

discs are designed for cutting material by edge. Other use of the circle may lead to its destruction and injury.

Special warnings when sanding

Do not use oversized sanding sheets and follow the manufacturer's specications for sanding sheets. Sanding

sheets that protrude beyond the edge of the sanding pad, may cause injury and blockage, tear or back kick.

Special warnings for working with wire brushes

а) Keep in mind that wire brushes lose elements during normal operation. Do not overload the brushes with excessive

pressing force. Flying pieces of wire can easily penetrate clothing and injure the operator.

б) If it is recommended to use a protective cover for work, then exclude the contact of the wire brush with the cover.

Keep in mind that disc and cup brushes can increase their diameter while rotating under the action of centrifugal

forces.

Residual risks

Despite compliance with the relevant safety instructions and the use of safety devices, some residual risks cannot

be completely eliminated. These include:

•

injuries caused by touching hot or rotating instrument parts or workpiece;

•

risk of pinching ngers when changing working tool;

•

damage to health due to vibration appearing at work.