Metabo PowerMaxx KP (БЕЗ АКК. и З/У) [9/72] Special safety instructions

ENGLISH en

3.4 Power tool use and care

a) Do not force the power tool. Use the correct

power tool for your application. The correct

power tool will do the job better and safer at the rate

for which it was designed.

b) Do not use the power tool if the switch does

not turn it on and off. Any power tool that cannot

be controlled with the switch is dangerous and must

be repaired.

c) Disconnect the plug from the power source

and/or the battery pack from the power tool

before making any adjustments, changing

accessories, or storing power tools. Such

preventive safety measures reduce the risk of

starting the power tool accidentally.

d) Store idle power tools out of the reach of

children and do not allow persons unfamiliar

with the power tool or these instructions to

operate the power tool. Power tools are

dangerous in the hands of untrained users.

e) Maintain power tools. Check for misalign-

ment or binding of moving parts, breakage of

parts and any other condition that may affect

the power tool's operation. If damaged, have

the power tool repaired before use. Many acci-

dents are caused by poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges

are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits

etc. in accordance with these instructions,

taking into account the working conditions and

the work to be performed. Use of the power tool

for operations different from those intended could

result in a hazardous situation.

3.5 Battery tool use and care

a) Recharge only with the charger specified by

the manufacturer. A charger that is suitable for

one type of battery pack may create a risk of fire

when used with another battery pack.

b) Use power tools only with specifically desig-

nated battery packs. Use of any other battery

packs may create a risk of injury and fire.

c) When battery pack is not in use, keep it away

from other metal objects, like paper clips,

coins, keys, nails, screws or other small metal

objects, that can make a connection from one

terminal to another. Shorting the battery terminals

together may cause burns or a fire.

d) Under abusive conditions, liquid may be

ejected from the battery; avoid contact. If

contact accidentally occurs, flush with water. If

liquid contacts eyes, additionally seek medical

help. Liquid ejected from the battery may cause irri-

tation or burns.

3.6 Service

a) Have your power tool serviced by a qualified

repair person using only identical replacement

parts. This will ensure that the safety of the power

tool is maintained.

Slightly acidic, flammable fluid may leak from

defective li-ion battery packs!

If battery fluid leaks out and comes into

contact with your skin, rinse immediately with plenty

of water. If battery fluid leaks out and comes into

contact with your eyes, wash them with clean water

and seek medical attention immediately.

Protect battery packs from water and mois-

ture!

Do not use faulty or deformed battery packs!

Do not expose battery packs to naked flame!

Do not open battery packs!

Do not touch or short-circuit battery packs!

Remove the battery pack from the machine before

any adjustments, conversions or servicing are

performed.

Before fitting the battery pack, make sure that the

machine is switched off.

Do not use frozen or set adhesive or sealant.

Do not overload the motor! If the motor is over-

loaded, switch off the device and remove the

battery pack. Determine the cause of the problem

and resolve it.

Refer to the instructions for assembling the device.

Ensure that the front cap, tube and threaded ring

are correctly fitted and securely fastened.

Always wear protective goggles.

Danger of crushing! Do not take hold of the toothed

rod (5)! Ensure that nothing is caught by the toothed

rod.

Follow national requirements for the materials you

want to work with.

Refer to the glue or adhesive manufacturers'

instructions and alsothe safety data sheet for the

consumable material.

Adhesives and sealants can be dangerous. For this

reason, you should always carefully read any

instructions on the container or other information

provided by the manufacturer about the material to

be used. Do not use materials without knowing what

risks they entail.

Do not use any solvent, acidic or other abrasive

cleaning agents.

Store the device and its components in a safe place

(e. g. ensure that the dismantled tube (3) is not

allowed to roll away).

See page 2.

1Front cap

2 Nozzle (for plastic bag) *

3Tube

4 Threaded ring for fastening the tube

4. Special Safety Instructions

5. Overview

Metabo PowerMaxx KP (БЕЗ АКК. и З/У) [9/72] Special safety instructions

Содержание

Похожие устройства