![Makita DGA511Z без акк. и з.у Инструкция по эксплуатации онлайн [7/28] 672236](/img/pdf.png)
Makita DGA511Z без акк. и з.у Инструкция по эксплуатации онлайн [7/28] 672236
![Makita DGA511Z без акк. и з.у Инструкция по эксплуатации онлайн [7/28] 672236](/views2/1628109/page7/bg7.png)
7 ENGLISH
3. -
cally designed and recommended by the tool
manufacturer.
safe operation.
4. The rated speed of the accessory must be at
least equal to the maximum speed marked on
the power tool.
5. The outside diameter and the thickness of your
accessory must be within the capacity rating
of your power tool.
6.
Threaded mounting of accessories must match
the grinder spindle thread. For accessories
hardware of the power tool will run out of balance,
7.
Do not use a damaged accessory. Before each
use inspect the accessory such as abrasive
wheels for chips and cracks, backing pad for
cracks, tear or excess wear, wire brush for loose
or cracked wires. If power tool or accessory
is dropped, inspect for damage or install an
undamaged accessory. After inspecting and
installing an accessory, position yourself and
bystanders away from the plane of the rotating
accessory and run the power tool at maximum
no-load speed for one minute. Damaged acces-
8.
Wear personal protective equipment.
Depending on application, use face shield,
safety goggles or safety glasses. As appropri-
ate, wear dust mask, hearing protectors, gloves
and workshop apron capable of stopping small
abrasive or workpiece fragments.-
9.
Keep bystanders a safe distance away from work
area. Anyone entering the work area must wear
personal protective equipment. Fragments of
10. Hold the power tool by insulated gripping
surfaces only, when performing an operation
where the cutting tool may contact hidden
wiring.
could give the operator an electric shock.
11. Never lay the power tool down until the acces-
sory has come to a complete stop.
12. Do not run the power tool while carrying it at
your side.
13. Regularly clean the power tool’s air vents.
motor’s fan will draw the dust inside the housing
and excessive accumulation of powdered metal
14.
materials. Sparks could ignite these materials.
15. Do not use accessories that require liquid
coolants.
Kickback and Related Warnings
Kickback is a sudden reaction to a pinched or snagged
-
-
trolled power tool to be forced in the direction opposite
For example, if an abrasive wheel is snagged or
entering into the pinch point can dig into the surface of
the material causing the wheel to climb out or kick out.
operator, depending on direction of the wheel’s move-
break under these conditions.
Kickback is the result of power tool misuse and/or
incorrect operating procedures or conditions and can be
1.
position your body and arm to allow you to
resist kickback forces. Always use auxiliary
handle, if provided, for maximum control over
kickback or torque reaction during start-up.
-
back forces, if proper precautions are taken.
2. Never place your hand near the rotating acces-
sory.
3. Do not position your body in the area where
power tool will move if kickback occurs.
Kickback will propel the tool in direction opposite
to the wheel’s movement at the point of snagging.
4. Use special care when working corners, sharp
edges etc. Avoid bouncing and snagging the
accessory. Corners, sharp edges or bouncing
and cause loss of control or kickback.
5. Do not attach a saw chain woodcarving blade
or toothed saw blade. Such blades create fre-
Cutting-Off Operations:
1. Use only wheel types that are recommended
designed for the selected wheel. Wheels for
which the power tool was not designed cannot be
2. The grinding surface of centre depressed
wheels must be mounted below the plane of
the guard lip.
3. The guard must be securely attached to the
power tool and positioned for maximum safety,
so the least amount of wheel is exposed
towards the operator.
the operator from broken wheel fragments, acci-
dental contact with wheel and sparks that could
ignite clothing.
Содержание
- Cordless angle grinder 1
- Applicable battery cartridge bl1815n bl1820 bl1820b bl1830 bl1830b bl1840 bl1840b bl1850 bl1850b bl1860b some of the battery cartridges listed above may not be available depending on your region of residence 2
- Due to our continuing program of research and development the speciications herein are subject to change without notice speciications may differ from country to country the weight may differ depending on the attachment s including the battery cartridge the lightest and heavi est combination according to epta procedure 01 2014 are shown in the table 2
- English 2
- Only use the battery cartridges listed above use of any other battery cartridges may cause injury and or ire 2
- Specifications 2
- Warning 2
- English 3
- Intended use 3
- Symbols 3
- The following show the symbols used for the equip ment be sure that you understand their meaning before use 3
- The noise level under working may exceed 80 db a 3
- The tool is intended for grinding sanding and cutting of metal and stone materials without the use of water 3
- The typical a weighted noise level determined according to en60745 3
- The vibration total value tri axial vector sum determined according to en60745 3
- Vibration 3
- Warning 3
- Wear ear protection 3
- Work mode surface grinding with normal side grip 3
- English 4
- Note the declared vibration emission value has been measured in accordance with the standard test method and may be used for comparing one tool with another 4
- Note the declared vibration emission value may also be used in a preliminary assessment of exposure 4
- Work mode disc sanding with anti vibration side grip 4
- Work mode disc sanding with normal side grip 4
- Work mode surface grinding with anti vibration side grip 4
- Ec declaration of conformity 5
- General power tool safety warnings 5
- Safety warnings 5
- Save all warnings and instruc tions for future reference 5
- Warning 5
- Cordless grinder safety warnings 6
- Caution 9
- Important safety instructions for battery cartridge 9
- Important safety instructions for wireless unit 9
- Save these instructions 9
- Tips for maintaining maximum battery life 9
- Warning 9
- Caution 10
- Functional description 10
- Installing or removing battery cartridge 10
- Save these instructions 10
- Indicating the remaining battery capacity 11
- Overload protection 11
- Tool battery protection system 11
- Caution 12
- Notice 12
- Overdischarge protection 12
- Overheat protection 12
- Releasing protection lock 12
- Shaft lock 12
- Speed adjusting dial 12
- Switch action 12
- Accidental re start preventive function 13
- Assembly 13
- Automatic speed change function 13
- Caution 13
- Electric brake 13
- Electronic torque control function 13
- Installing or removing wheel guard for depressed center wheel lap disc lex wheel wire wheel brush abrasive cut off wheel diamond wheel 13
- Installing side grip handle 13
- Notice 13
- Soft start feature 13
- Warning 13
- Caution 14
- For tool with clamp lever type wheel guard 14
- For tool with locking screw type wheel guard 14
- Installing or removing depressed center wheel or lap disc 14
- Warning 14
- For 100 mm 4 model 15
- For 115 mm 4 1 2 125 mm 5 model 15
- Installing or removing abrasive disc 15
- Installing or removing lex wheel 15
- Warning 15
- Caution 16
- Connecting a vacuum cleaner 16
- Grinding and sanding operation 16
- Operation 16
- Operation with abrasive cut off diamond wheel 16
- Warning 16
- Caution 17
- For 100 mm 4 model 17
- For 115 mm 4 1 2 125 mm 5 model 17
- Mm 5 8 16 mm 5 8 17
- Operation with wire cup brush 17
- Caution 18
- Installing the wireless unit 18
- Notice 18
- Operation with wire wheel brush 18
- What you can do with the wireless activation function 18
- Wireless activation function 18
- Notice 19
- Tool registration for the vacuum cleaner 19
- Starting the wireless activation function 20
- 1 wireless activation lamp 22
- Description of the wireless activation lamp status 22
- English 22
- The wireless activation lamp shows the status of the wireless activation function refer to the table below for the meaning of the lamp status 22
- Cancelling tool registration for the vacuum cleaner 23
- Before asking for repairs conduct your own inspection irst if you ind a problem that is not explained in the manual do not attempt to dismantle the tool instead ask makita authorized service centers always using makita replace ment parts for repairs 24
- English 24
- Troubleshooting for wireless activation function 24
- 1 dust cover 25
- 1 exhaust vent 2 inhalation vent 25
- Air vent cleaning 25
- Always be sure that the tool is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance 25
- Caution 25
- Clean out the dust cover when it is clogged with dust or foreign matters continuing operation with a clogged dust cover may damage the tool 25
- English 25
- Maintenance 25
- Never use gasoline benzine thinner alcohol or the like discoloration deformation or cracks may result 25
- Notice 25
- Remove the dust cover from inhalation vent and clean it for smooth air circulation 25
- The tool and its air vents have to be kept clean regularly clean the tool s air vents or whenever the vents start to become obstructed 25
- Caution 26
- English 26
- If you need any assistance for more details regarding these accessories ask your local makita service center makita genuine battery and charger wireless unit for models with wireless activation function 26
- Note 1 in some european countries when using a diamond wheel the ordinary guard can be used instead of the special guard covering the both side of the wheel follow the regulations in your country 26
- Note some items in the list may be included in the tool package as standard accessories they may differ from country to country 26
- Optional accessories 26
- These accessories or attachments are recommended for use with your makita tool spec iied in this manual the use of any other accessories or attachments might present a risk of injury to persons only use accessory or attachment for its stated purpose 26
- M a k i t a c o r p o r a t i o n 28
- M a k i t a e u r o p e n v 28
- W w w m a k i t a c o m 28
Похожие устройства
- Makita DGA517Z без акк. и з.у Инструкция по эксплуатации
- Makita DHS680Z без акк. и з.у Инструкция по эксплуатации
- Makita DRS780Z без акк. и з.у Инструкция по эксплуатации
- Makita DTD155Z без акк. и з.у Инструкция по эксплуатации
- Makita HR166DZ без акк. и з.у Инструкция по эксплуатации
- Makita JV102DZ без акк. и з.у Инструкция по эксплуатации
- Makita JV103DZ без акк. и з.у Инструкция по эксплуатации
- Makita SD100DZ без акк. и з.у Инструкция по эксплуатации
- Makita DHR171Z без акк. и з.у Инструкция по эксплуатации
- СОЮЗ КПС-24600 Инструкция по эксплуатации
- BLACK & DECKER BL186KB Инструкция по эксплуатации
- Bosch EasyCut 50 (06033C8020) Инструкция по эксплуатации
- Steinel GLUEMATIC 3002 (333317) Инструкция по эксплуатации
- Metabo GB 18 LTX BL Q I (603828840) без акк и з.у Инструкция по эксплуатации
- Bosch Пила циркулярная GKS 12 V-LI (06016A1000) +Аккумулятор 12 В20Ач LiION (1600Z0002X) Инструкция по эксплуатации
- Bosch Пила циркулярная GKS 12V-26 ProfessionalI (06016A1001) без акк. и з.у+Аккумулятор 12 В20Ач LiION (1600Z0002X) Руководство пользователя
- Bosch Рубанок GHO 12V-20 (06015A7000) без акк. и з.у +Аккумулятор 12 В20Ач LiION (1600Z0002X) Инструкция по эксплуатации
- Bosch AdvancedGrind 18 (06033D3100) без акк. и з.у Инструкция по эксплуатации
- Bosch PSA 18 LI (06033B2301) без акк. и з.у Инструкция по эксплуатации
- Bosch AdvancedOrbit 18 (06033D2100) без акк. и з.у Инструкция по эксплуатации