![Makita DGA511Z без акк. и з.у [9/28] Save these instructions](/img/pdf.png)
Makita DGA511Z без акк. и з.у [9/28] Save these instructions
![Makita УШМ (болгарка) DGA511Z БЕЗ АКК. и ЗУ +Сумка PGH-170100 [9/28] Save these instructions](/views2/1628109/page9/bg9.png)
9 ENGLISH
19. Do not use cloth work gloves during operation.
causes tool breakage.
SAVE THESE INSTRUCTIONS.
WARNING: DO NOT let comfort or familiarity
with product (gained from repeated use) replace
strict adherence to safety rules for the subject
product. MISUSE or failure to follow the safety
rules stated in this instruction manual may cause
serious personal injury.
Important safety instructions for
battery cartridge
1. Before using battery cartridge, read all instruc-
tions and cautionary markings on (1) battery
charger, (2) battery, and (3) product using
battery.
2. Do not disassemble battery cartridge.
3. If operating time has become excessively
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.
4. If electrolyte gets into your eyes, rinse them
out with clear water and seek medical atten-
tion right away. It may result in loss of your
eyesight.
5. Do not short the battery cartridge:
Do not touch the terminals with any con-
ductive material.
Avoid storing battery cartridge in a con-
tainer with other metal objects such as
nails, coins, etc.
Do not expose battery cartridge to water
or rain.
A battery short can cause a large current
breakdown.
6. Do not store the tool and battery cartridge in
locations where the temperature may reach or
exceed 50 °C (122 °F).
7. Do not incinerate the battery cartridge even if
it is severely damaged or is completely worn
8. Be careful not to drop or strike battery.
9. Do not use a damaged battery.
10. The contained lithium-ion batteries are subject
to the Dangerous Goods Legislation require-
ments.
-
aging and labeling must be observed.
For preparation of the item being shipped, consult-
national regulations.
around in the packaging.
11. Follow your local regulations relating to dis-
posal of battery.
12. Use the batteries only with the products
Installing the batteries to
-
SAVE THESE INSTRUCTIONS.
CAUTION: Only use genuine Makita batteries.
Use of non-genuine Makita batteries, or batteries that
charger.
Tips for maintaining maximum
battery life
1. Charge the battery cartridge before completely
discharged. Always stop tool operation and
charge the battery cartridge when you notice
less tool power.
2. Never recharge a fully charged battery car-
tridge. Overcharging shortens the battery
service life.
3. Charge the battery cartridge with room tem-
perature at 10 °C - 40 °C (50 °F - 104 °F). Let
a hot battery cartridge cool down before
charging it.
4. Charge the battery cartridge if you do not use
it for a long period (more than six months).
Important safety instructions for
wireless unit
1. Do not disassemble or tamper with the wire-
less unit.
2. Keep the wireless unit away from young chil-
dren. If accidentally swallowed, seek medical
attention immediately.
3. Use the wireless unit only with Makita tools.
4. Do not expose the wireless unit to rain or wet
conditions.
5. Do not use the wireless unit in places where
the temperature exceeds 50°C (122°F).
6. Do not operate the wireless unit in places
where medical instruments, such as heart
pace makers are near by.
7. Do not operate the wireless unit in places
where automated devices are near by. If oper-
or error.
8. The wireless unit can produce electromagnetic
user.
9. The wireless unit is an accurate instrument. Be
careful not to drop or strike the wireless unit.
10. Avoid touching the terminal of the wireless
unit with bare hands or metallic materials.
11. Always remove the battery on the tool when
installing the wireless unit.
12. When opening the lid of the slot, avoid the
place where dust and water may come into the
slot. Always keep the inlet of the slot clean.
13. Always insert the wireless unit in the correct
direction.
Содержание
- Cordless angle grinder 1
- Applicable battery cartridge bl1815n bl1820 bl1820b bl1830 bl1830b bl1840 bl1840b bl1850 bl1850b bl1860b some of the battery cartridges listed above may not be available depending on your region of residence 2
- Due to our continuing program of research and development the speciications herein are subject to change without notice speciications may differ from country to country the weight may differ depending on the attachment s including the battery cartridge the lightest and heavi est combination according to epta procedure 01 2014 are shown in the table 2
- English 2
- Only use the battery cartridges listed above use of any other battery cartridges may cause injury and or ire 2
- Specifications 2
- Warning 2
- English 3
- Intended use 3
- Symbols 3
- The following show the symbols used for the equip ment be sure that you understand their meaning before use 3
- The noise level under working may exceed 80 db a 3
- The tool is intended for grinding sanding and cutting of metal and stone materials without the use of water 3
- The typical a weighted noise level determined according to en60745 3
- The vibration total value tri axial vector sum determined according to en60745 3
- Vibration 3
- Warning 3
- Wear ear protection 3
- Work mode surface grinding with normal side grip 3
- English 4
- Note the declared vibration emission value has been measured in accordance with the standard test method and may be used for comparing one tool with another 4
- Note the declared vibration emission value may also be used in a preliminary assessment of exposure 4
- Work mode disc sanding with anti vibration side grip 4
- Work mode disc sanding with normal side grip 4
- Work mode surface grinding with anti vibration side grip 4
- Ec declaration of conformity 5
- General power tool safety warnings 5
- Safety warnings 5
- Save all warnings and instruc tions for future reference 5
- Warning 5
- Cordless grinder safety warnings 6
- Caution 9
- Important safety instructions for battery cartridge 9
- Important safety instructions for wireless unit 9
- Save these instructions 9
- Tips for maintaining maximum battery life 9
- Warning 9
- Caution 10
- Functional description 10
- Installing or removing battery cartridge 10
- Save these instructions 10
- Indicating the remaining battery capacity 11
- Overload protection 11
- Tool battery protection system 11
- Caution 12
- Notice 12
- Overdischarge protection 12
- Overheat protection 12
- Releasing protection lock 12
- Shaft lock 12
- Speed adjusting dial 12
- Switch action 12
- Accidental re start preventive function 13
- Assembly 13
- Automatic speed change function 13
- Caution 13
- Electric brake 13
- Electronic torque control function 13
- Installing or removing wheel guard for depressed center wheel lap disc lex wheel wire wheel brush abrasive cut off wheel diamond wheel 13
- Installing side grip handle 13
- Notice 13
- Soft start feature 13
- Warning 13
- Caution 14
- For tool with clamp lever type wheel guard 14
- For tool with locking screw type wheel guard 14
- Installing or removing depressed center wheel or lap disc 14
- Warning 14
- For 100 mm 4 model 15
- For 115 mm 4 1 2 125 mm 5 model 15
- Installing or removing abrasive disc 15
- Installing or removing lex wheel 15
- Warning 15
- Caution 16
- Connecting a vacuum cleaner 16
- Grinding and sanding operation 16
- Operation 16
- Operation with abrasive cut off diamond wheel 16
- Warning 16
- Caution 17
- For 100 mm 4 model 17
- For 115 mm 4 1 2 125 mm 5 model 17
- Mm 5 8 16 mm 5 8 17
- Operation with wire cup brush 17
- Caution 18
- Installing the wireless unit 18
- Notice 18
- Operation with wire wheel brush 18
- What you can do with the wireless activation function 18
- Wireless activation function 18
- Notice 19
- Tool registration for the vacuum cleaner 19
- Starting the wireless activation function 20
- 1 wireless activation lamp 22
- Description of the wireless activation lamp status 22
- English 22
- The wireless activation lamp shows the status of the wireless activation function refer to the table below for the meaning of the lamp status 22
- Cancelling tool registration for the vacuum cleaner 23
- Before asking for repairs conduct your own inspection irst if you ind a problem that is not explained in the manual do not attempt to dismantle the tool instead ask makita authorized service centers always using makita replace ment parts for repairs 24
- English 24
- Troubleshooting for wireless activation function 24
- 1 dust cover 25
- 1 exhaust vent 2 inhalation vent 25
- Air vent cleaning 25
- Always be sure that the tool is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance 25
- Caution 25
- Clean out the dust cover when it is clogged with dust or foreign matters continuing operation with a clogged dust cover may damage the tool 25
- English 25
- Maintenance 25
- Never use gasoline benzine thinner alcohol or the like discoloration deformation or cracks may result 25
- Notice 25
- Remove the dust cover from inhalation vent and clean it for smooth air circulation 25
- The tool and its air vents have to be kept clean regularly clean the tool s air vents or whenever the vents start to become obstructed 25
- Caution 26
- English 26
- If you need any assistance for more details regarding these accessories ask your local makita service center makita genuine battery and charger wireless unit for models with wireless activation function 26
- Note 1 in some european countries when using a diamond wheel the ordinary guard can be used instead of the special guard covering the both side of the wheel follow the regulations in your country 26
- Note some items in the list may be included in the tool package as standard accessories they may differ from country to country 26
- Optional accessories 26
- These accessories or attachments are recommended for use with your makita tool spec iied in this manual the use of any other accessories or attachments might present a risk of injury to persons only use accessory or attachment for its stated purpose 26
- M a k i t a c o r p o r a t i o n 28
- M a k i t a e u r o p e n v 28
- W w w m a k i t a c o m 28
Похожие устройства
- Makita DGA517Z без акк. и з.у Инструкция по эксплуатации
- Makita DHS680Z без акк. и з.у Инструкция по эксплуатации
- Makita DRS780Z без акк. и з.у Инструкция по эксплуатации
- Makita DTD155Z без акк. и з.у Инструкция по эксплуатации
- Makita HR166DZ без акк. и з.у Инструкция по эксплуатации
- Makita JV102DZ без акк. и з.у Инструкция по эксплуатации
- Makita JV103DZ без акк. и з.у Инструкция по эксплуатации
- Makita SD100DZ без акк. и з.у Инструкция по эксплуатации
- Makita DHR171Z без акк. и з.у Инструкция по эксплуатации
- СОЮЗ КПС-24600 Инструкция по эксплуатации
- BLACK & DECKER BL186KB Инструкция по эксплуатации
- Bosch EasyCut 50 (06033C8020) Инструкция по эксплуатации
- Steinel GLUEMATIC 3002 (333317) Инструкция по эксплуатации
- Metabo GB 18 LTX BL Q I (603828840) без акк и з.у Инструкция по эксплуатации
- Bosch Пила циркулярная GKS 12 V-LI (06016A1000) +Аккумулятор 12 В20Ач LiION (1600Z0002X) Инструкция по эксплуатации
- Bosch Пила циркулярная GKS 12V-26 ProfessionalI (06016A1001) без акк. и з.у+Аккумулятор 12 В20Ач LiION (1600Z0002X) Руководство пользователя
- Bosch Рубанок GHO 12V-20 (06015A7000) без акк. и з.у +Аккумулятор 12 В20Ач LiION (1600Z0002X) Инструкция по эксплуатации
- Bosch AdvancedGrind 18 (06033D3100) без акк. и з.у Инструкция по эксплуатации
- Bosch PSA 18 LI (06033B2301) без акк. и з.у Инструкция по эксплуатации
- Bosch AdvancedOrbit 18 (06033D2100) без акк. и з.у Инструкция по эксплуатации