Makita УШМ (болгарка) DGA452Z аккумуляторная +Сумка PGH-170100 [7/16] For battery cartridge

wobbling that could indicate poor installation

or a poorly balanced wheel.

21. Use the specified surface of the wheel to

perform the grinding.

22. Do not leave the tool running. Operate the tool

only when hand-held.

23. Do not touch the workpiece immediately after

operation; it may be extremely hot and could

burn your skin.

24. Observe the instructions of the manufacturer

for correct mounting and use of wheels.

Handle and store wheels with care.

25. Do not use separate reducing bushings or

adaptors to adapt large hole abrasive wheels.

26. Use only flanges specified for this tool.

27. For tools intended to be fitted with threaded

hole wheel, ensure that the thread in the

wheel is long enough to accept the spindle

length.

28. Check that the workpiece is properly

supported.

29. Pay attention that the wheel continues to

rotate after the tool is switched off.

30. If working place is extremely hot and humid,

or badly polluted by conductive dust, use a

short-circuit breaker (30 mA) to assure

operator safety.

31. Do not use the tool on any materials

containing asbestos.

32. When use cut-off wheel, always work with the

dust collecting wheel guard required by

domestic regulation.

33. Cutting discs must not be subjected to any

lateral pressure.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity with product

(gained from repeated use) replace strict adherence

to safety rules for the subject product. MISUSE or

failure to follow the safety rules stated in this

instruction manual may cause serious personal

injury.

ENC007-8

IMPORTANT SAFETY

INSTRUCTIONS

FOR BATTERY CARTRIDGE

1. Before using battery cartridge, read all

instructions and cautionary markings on (1)

battery charger, (2) battery, and (3) product

using battery.

2. Do not disassemble battery cartridge.

3. If operating time has become excessively

shorter, stop operating immediately. It may

result in a risk of overheating, possible burns

and even an explosion.

4. If electrolyte gets into your eyes, rinse them

out with clear water and seek medical

attention right away. It may result in loss of

your eyesight.

5. Do not short the battery cartridge:

(1) Do not touch the terminals with any

conductive material.

(2) Avoid storing battery cartridge in a

container with other metal objects such

as nails, coins, etc.

(3) Do not expose battery cartridge to water

or rain.

A battery short can cause a large current flow,

overheating, possible burns and even a

breakdown.

6. Do not store the tool and battery cartridge in

locations where the temperature may reach or

exceed 50 ﾟ C (122 ﾟ F).

7. Do not incinerate the battery cartridge even if

it is severely damaged or is completely worn

out. The battery cartridge can explode in a fire.

8. Be careful not to drop or strike battery.

9. Do not use a damaged battery.

10. Follow your local regulations relating to

disposal of battery.

SAVE THESE INSTRUCTIONS.

Tips for maintaining maximum battery life

1. Charge the battery cartridge before

completely discharged.

Always stop tool operation and charge the

battery cartridge when you notice less tool

power.

2. Never recharge a fully charged battery

cartridge.

Overcharging shortens the battery service life.

3. Charge the battery cartridge with room

temperature at 10 ﾟ C - 40 ﾟ C (50 ﾟ F - 104 ﾟ F).

Let a hot battery cartridge cool down before

charging it.

4. Charge the battery cartridge once in every six

months if you do not use it for a long period

of time.

Makita УШМ (болгарка) DGA452Z аккумуляторная +Сумка PGH-170100 [7/16] For battery cartridge

Содержание

Похожие устройства