Home
Главная
Vitek
Кофеварки
VT-1504 BW
Руководство по эксплуатации Страница: 4

Vitek VT-1504 BW [4/56] English

ENGLISH

– Make sure that operating voltage of the unit corre-

sponds to voltage of your mains.

– Before using the coffee maker for the first time wash

all the removable parts, namely the lid (9), the water

tank (10), the filter holder (15), the coffee filter (16)

and the measuring spoon (17) with warm water and

a neutral detergent.

Washing the boiler

– Make sure that the power plug is not inserted into

the mains socket, and the steam supply knob (11) is

in the position «OFF».

– Remove the water tank (10) and fill it with cold water

till the «MAX» mark.

– Cover the tank (10) with the lid (9) and place it on the

coffee maker body (3).

– Insert the coffee filter (16) into the holder (15) (pic.

1).

– Without adding coffee into the filter (16) attach the

filter holder (15) to the boiler; to do this, place the

filter holder handle (13) as shown on the picture 2,

then turn it to the right till bumping (pic. 3).

– Place a suitable cup on the grid (2).

– Insert the power plug into the mains socket.

– Switch the coffee maker on pressing the button (6)

, the button (6) indicator will be flash-

ing indicating that the boiler heating is on.

– Wait till the boiler heats up (the button (6)

indicator stops flashing), then press the button (5)

. Wait till the cup is full, then pour out the wa-

ter.

Note: If the cup capacity is not enough, stop the water

supply by pressing the button (5)

again.

– Repeat this procedure several times, the boiler will

be clean after that.

Attention!

Do not remove the filter holder (15) during the cof-

fee maker operation.

– Before washing the cappuccinator pipe (12) place a

suitable cup under it.

– Press the button (7)

, the button (7) indicator

will be flashing, wait till the button (7)

indica-

tor will stop flashing.

– For steam supply slightly turn the steam supply

knob (11) counterclockwise.

– Wait till some water pours from the cappuccina-

tor pipe (12), steam will go out more intensively af-

ter that; switch the steam supply off after a while

by setting the steam supply knob (11) to the posi-

tion «OFF».

– To switch to coffee making mode press the button

(6)

– To switch the coffee maker in the coffee making

mode off press the button (6)

– To switch the coffee maker in the steam supply

mode off press the button (7)

Note: When the electric pump is switched on for the first

time for water supply, a foreign sound and noticeable

vibration of the unit body is possible; when the pump

is filled with water, the sound and vibration level will

decrease significantly.

Setting of coffee making duration

By default coffee maker operation time is 20 seconds

when pressing the button (4)

and 35 seconds (ex-

cluding the time necessary for preliminary soaking of

coffee in the filter (16)) when pressing the button (5)

You can change the amount of ready drink by changing

the coffee making duration. Preset coffee making time is

saved in the coffee maker. Preset time remains the same

when you switch the unit afterwards.

– Press and hold the button (4)

for 20-60 seconds,

and the button (5)

- for 35-100 seconds.

– Coffee making duration will correspond the time you

hold the corresponding button.

– To switch the unit back to default settings press

and hold the buttons (4)

and (5) for sev-

eral seconds.

Example:

Press and hold the button (4)

for 30 seconds. Press

the button(4)

again, the coffee maker will operate in

the coffee making mode for 30 seconds.

If you hold the button (4)

for 70 seconds, the coffee

maker will operate for maximal possible time that is 60

seconds.

To set longer coffee making duration (35-100 seconds)

use the button (5)

Note: Amount of ready drink depends on sort of cof-

fee, degree of its fineness and on the effort you made

tampering it in the filter (16).

Making espresso

Note: Repeated making of coffee should be performed

after at least 5 min interval.

– Use only clear water for making coffee and keep the

water tank (10) clean.

– Before making coffee wait till the boiler heats up

(the button (6)

indicator will stop flashing).

– Before making coffee warm up the filter holder (15),

the filter (16) and the cups by placing them on the

tray (8).

– You can warm the filter holder (15) and the filter (16)

with hot water from the boiler without adding cof-

fee to the filter:

– attach the holder (15) to the coffee maker boiler

(pic. 2, 3).

– place a suitable cup on the grid (2).

– switch the water supply on by pressing the but-

ton (4)

or (5) .

Note: If you want to stop the water supply, press the

button (4)

or the button (5) again.

– Remove the cup, remove the holder (15). If there is

water in the filter (16), lift the filter clamp (14) and,

holding the filter (16) with this clamp, pour out the

water.

VT-1504_IM.indd 4 11.07.2013 14:31:29

Vitek VT-1504 BW [4/56] English

Содержание

Похожие устройства