Philips GC6722 [8/110] English

Philips GC6722 [8/110] English
10
Problem Possible cause Solution
Water droplets come out of
the soleplate.
After the Calc-Clean process
remaining water may drip out of the
soleplate.
Wipe the soleplate dry with a piece of cloth.
If the Calc-Clean light still ashes and the
appliance still beeps, perform the Calc-
Clean process (see chapter ‘Cleaning and
maintenance’).
The Calc-Clean process has not
been completed.
You have to perform the Calc-Clean process
again (see chapter ‘Cleaning and maintenance’).
Steam condenses into water in the
hose when you use steam for the
rst time or have not used it for a
long time.
This is normal. Hold the iron away from the
garment and press the steam trigger.Wait
until steam instead of water comes out of the
soleplate.
Dirty water and impurities
come out of the soleplate.
Impurities or chemicals present in
the water have deposited in the
steam vents and/or soleplate.
Perform the Calc-Clean process regularly (see
chapter ‘Cleaning and maintenance’).
Steam condenses into water in the
hose when you use steam for the
rst time or have not used it for a
long time.
This is normal. Hold the iron away from the
garment and press the steam trigger.Wait
until steam instead of water comes out of the
soleplate.
Water ushes out of the
soleplate.
You have accidentally started the
Calc-Clean process (see chapter
'Cleaning and maintenance').
Switch o the appliance. Then switch it back on
again. Let the iron heat up until the ‘iron ready’
light lights up steadily.
The Calc-Clean process does
not start.
You have not pressed the CALC-
CLEAN button for 2 seconds until
the appliance started beeping.
See chapter ‘Cleaning and maintenance’.
The ironing board cover
becomes wet, or there are
water droplets on the oor/
garment.
Steam has condensed on the
ironing board cover after a long
ironing session.
Replace the ironing board cover if the foam or
felt material has worn out. You can also add
an extra layer of felt material under the ironing
board cover to prevent condensation on the
ironing board.
You have an ironing board that is
not designed to cope with the high
steam rate of the appliance.
Put an extra layer of felt material under the
ironing board cover to prevent condensation on
the ironing board.
English

Содержание

Скачать