Vitek VT-1238 VT [7/56] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Vitek VT-1238 VT [7/56] English

Vitek VT-1238 VT [7/56] English
7
ENGLISH
Note: While steam ironing set the tem-
perature «•••» or «МАХ».
WATER SPRAYER
• You can dampen the fabric by pressing
the spray button (4) several times.
• Make sure that there is enough water in
the water tank (10).
IRONING
• Place the iron on the base (8).
• Insert the power plug into the outlet.
• Set the temperature regulator (11) to the
required ironing temperature: “•”, “••”,
“•••” or “max” (depending on the type
of fabric), the (9) indicator will light up.
• When the soleplate temperature (13)
reaches the desired temperature point,
the (9) indicator will go out, you can start
ironing.
• When you finish ironing set the (11) regula-
tor to the “min” position.
• Pull the plug out of the socket and let the
iron cool down completely.
STEAM IRONING
For steam ironing set the temperature regula-
tor to «•••» or «МАХ». The iron has an anti-
drop valve, which stops water supply, when
the soleplate temperature is too low it pre-
vents the appearance of drops out of the sole-
plate openings (13). While heating or cooling
down of the soleplate (13), you will hear clicks
of opening/closing of the anti-drop valve it
means that the valve works normally.
• Place the iron on the base (8).
• Insert the power plug into the outlet.
• Make sure that there is enough water in
the water tank (10).
• Set the temperature regulator (11) to the
required ironing temperature: “•••” or
“max”, the (9) indicator will light up.
• When the soleplate temperature (13) reach-
es the desired temperature point, the (9)
indicator will go out, you can start ironing.
• Turn the steam supply regulator (3) to set
the intensity of steaming, steam will start
outgoing from the openings of the sole-
plate (13).
• When you finish ironing set the (11) regu-
lator to the “min” position and the steam
supply regulator (3) to the left position.
• Pull the plug out of the socket and let the
iron cool down completely.
ATTENTION!
If during the operation steam is not con-
stantly supplied, check whether the temper-
ature regulator (11) is set properly.
ADDITIONAL STEAM RELEASE
Additional steam release function is use-
ful when ironing folds and can only be used
at high ironing temperatures (when the iron
temperature regulator (11) is set to “•••” or
“max”).
• When the additional steam release button
(5) is pressed, steam will be vigorously re-
leased from the openings in the iron sole-
plate.
Note: In order to avoid leakage of water
from steam openings, press the addi-
tional steam supply button (5) with 4-5
sec. interval.
STEAM CHAMBER CLEANING
To prolong lifetime of the iron we recom-
mend cleaning the steam chamber, espe-
cially in the regions with “hard” water.
• Set the steam supply regulator (3) to the
steam release OFF position.
• Fill the water tank (10) till the MAX mark
(12).
• Put the iron on the base (9).
• Insert the power plug into the outlet.
• Set the temperature regulator (11) to the
MAX. temperature: “max” the (9) indica-
tor will light up.
• When the soleplate temperature (13)
reaches the desired temperature point,
the (9) indicator will go out, you can start
cleaning of the iron chamber.
• Unplug the iron, set the temperature reg-
VT-1238_IM.indd 7 14.10.2013 14:17:16

Содержание

Похожие устройства

Скачать