![Aten VM6809H [10/148] About this manual](/img/pdf.png)
Aten VM6809H [10/148] About this manual
![Aten VM6809H [10/148] About this manual](/views2/1977709/page10/bga.png)
VM6404H / VM6809H User Manual
x
About this Manual
This User Manual is provided to help you get the most from your VM6404H /
VM6809H system. It covers all aspects of installation, configuration and
operation. An overview of the information found in the manual is provided
below.
Chapter 1 Introduction, introduces you to the VM6404H / VM6809H
system. Its purpose, features and benefits are presented, and its front and back
panel components are described.
Chapter 2 Hardware Setup, describes how to set up your VM6404H /
VM6809H installation.
Chapter 3 Front Panel Configuration, explains the fundamental
concepts involved in operating the VM6404H / VM6809H at the local site via
the front panel LCD display using pushbuttons.
Chapter 4 Browser Operation, provides a complete description of the
VM6404H / VM6809H's Browser Graphical User Interface (GUI), and how to
use it to remotely configure and operate the VM6404H / VM6809H.
Chapter 5 CLI Commands, provides a complete list of the serial control
protocol commands used when utilizing the RS-232 Serial Port so that an extra
source device can be utilized in the installation.
Appendix, which provides specifications and other technical information
regarding the VM6404H / VM6809H.
Note:
Read this manual thoroughly and follow the installation and operation
procedures carefully to prevent any damage to the unit or any connected
devices.
The product may be updated, with features and functions added, improved
or removed since the release of this manual. For an up-to-date user
manual, visit http://www.aten.com/global/en
Содержание
- Vm6404h vm6809h 1
- Compliance statements 2
- Online registration 4
- Telephone support 4
- User information 4
- User notice 4
- Package contents 5
- Product information 5
- Contents 6
- Front panel configuration 6
- Hardware setup 6
- Introduction 6
- Browser operation 7
- Cli commands 8
- Appendix 9
- About this manual 10
- Conventions 11
- This manual uses the following conventions 11
- This page intentionally left blank 12
- Chapter 1 13
- Introduction 13
- Overview 13
- Features 14
- Cables 15
- Display devices 15
- Requirements 15
- Source devices 15
- Browsers 16
- Recommended web browsers for vm6404h are shown in the table below 16
- Source device operating systems 16
- Supported operating systems are shown in the table below 16
- Recommended web browsers for vm6809h are shown in the table below 17
- Components 18
- Vm6404h front view 18
- Vm6404h rear view 19
- Vm6809h front view 20
- Vm6809h rear view 21
- 4 output pushbuttons 22
- For vm6404h only 22
- Ir remote control 22
- The vm6404h s ir remote control only supports use the 1 4 input and 22
- Chapter 2 23
- Hardware setup 23
- Rack mounting 23
- Grounding 25
- Cable connection 26
- Chapter 2 hardware setup 27
- Installation diagram 27
- Vm6404h 27
- Vm6809h 27
- This page intentionally left blank 28
- Chapter 3 29
- Front panel configuration 29
- Front panel pushbuttons 29
- Overview 29
- Enter password 30
- Input assignment 31
- Main screen 31
- Port switching 31
- Output port assignment 32
- Chapter 3 front panel configuration 33
- Lcd menu organization 33
- Note 1 the highlighted values are the default settings of the vm6404h vm6809h 33
- The audio extract is only supported by vm6809h 33
- The vm6404h vm6809h has a built in configuration utility via the front panel lcd which can be controlled by pressing the menu and front panel input pushbuttons 1 4 or 1 8 user can cycle through the menu options starting from ip setting page in the order shown in the table below 33
- Ip address subnet mask 34
- Ip setting 34
- Menu pushbutton 34
- Gateway 35
- Baud rate 36
- Serial port setting 36
- Edid mode 37
- Operation mode 37
- Edid mode options are 38
- Press cancel to go back a level return to the initial screen or exit 38
- Press input pushbuttons 1 4 to make your selection 38
- Press menu to return to the menu page 38
- Video outputs 41
- Output resolutions 42
- Audio extract 44
- Security mode 45
- Changing the lcd password 47
- Save to a profile 49
- Playing stopping the profile schedule 50
- Stopping the profile schedule 50
- Turn video wall off 50
- Profile pushbutton 51
- Change the input source of an output display 52
- Ir remote control operation 52
- Power on off individual output displays 52
- Power on off all output displays 53
- This page intentionally left blank 54
- Browser operation 55
- Chapter 4 55
- Logging in 55
- Overview 55
- Main page 56
- Menu bar 56
- Profiles 57
- Understanding profiles and profile list 57
- Creating a profile 58
- Configuring video settings of a profile 60
- Configuring video settings in normal view 62
- Control description 62
- Profile layout settings 62
- Control description 63
- Display preferences 63
- Display preferences to configure the display preferences for one or more displays click the display s in the preview the display preference settings appear configure the settings as required 63
- Video wall settings 64
- Configuring video settings in grid view 68
- Playing a profile 70
- To adjust the played profile click on the play window the following controls appear 71
- Input assignment 72
- Input assignment use the change input page to see a preview of the input assignments for the profile allows you to change the inputs and view a live stream of each input to access this page click change input from the play window see input assignment page 60 72
- The following controls are available on the change input page 72
- Exporting a profile 73
- Importing a profile 74
- Playing a profile schedule 75
- Profile scheduling 75
- Creating the profile schedule 77
- Editing the profile schedule 79
- Configure the sequence play duration of the added profiles using the following controls 80
- Overview 81
- System settings 81
- The table below provides an overview of the available settings for each tab 82
- Basics 83
- Fan status 83
- General 83
- Serial settings 83
- Osd cec 84
- Port settings 84
- Scaler 86
- Customized resolution 87
- Use the drop down menu to select your pre defined video resolution 89
- Port name 90
- Edid settings 91
- Edid mode 92
- Customized mode 93
- Edid cea description 95
- Customized edid parameters 96
- Detail timing display description 98
- Monitor description 99
- Cea settings 100
- Video data 101
- Audio data 102
- Hdmi forum vendor specific block 103
- Ycbcr 4 2 0 video data block 104
- Ycbcr 4 2 0 compatibility map data block 105
- Connections 106
- Status 106
- System information 107
- Maintenance 108
- System setup 108
- Restoring default settings 109
- System backup 109
- System upgrades 109
- User account 110
- Adding an user account 111
- Permission level 112
- Network 113
- This page intentionally left blank 114
- Chapter 5 115
- Cli commands 115
- Connecting to the matrix switch via telnet 115
- Overview 115
- Connect the rs 232 serial port on the vm6404h vm6809h to the rs 232 serial port on your computer using a 9 wire straight cable with only pin 2 to pin 2 pin 3 to pin 3 and pin 5 to pin 5 connected 116
- Connecting to the matrix switch via rs 232 116
- The controller s serial port should be configured as follows 116
- When a session is established with the vm6404h vm6809h you can control and configure the vm6404h vm6809h via rs 232 commands for more information on commands see commands page 105 116
- You can control and operate the vm6404h vm6809h using a high end controller or pc to connect to the vm6404h vm6809h via rs 232 do the following 116
- Commands 117
- Switch port command 117
- Verification 117
- Audio output will be used 118
- Each command string can be separated with a space 118
- Note 1 by default input port 01 is tied to output port 01 input port 02 is tied to output port 02 and so on until port 04 i e o01 i01 o02 i02 118
- The following tables show the possible values for the switch port command 118
- The group can be skipped and the default value normal hdmi 118
- The port number can be skipped and the default value will be used 118
- Chapter 5 cli commands 119
- The following table lists the available switch port commands 119
- Command control enter 120
- Edid mode command 120
- Edid port1 enter 120
- Extended display identification data edid is a data that contains a display s basic information and is used to communicate with the video source 120
- For example to use the port1 edid mode type 120
- Note each command string can be separated with a space 120
- The following table lists the available edid commands 120
- The following tables show the possible values for the edid command 120
- The formula for the edid command is as follows 120
- Audio output will be used 121
- Command output number control enter 121
- Command output number group control enter 121
- For example to mute the audio coming from output port 1 type 121
- Mute allows you to enable or disable an output port s audio 121
- Mute command 121
- Mute o01 on enter 121
- Note 1 each command string can be separated with a space 121
- Skip the output port command to mute or enable the audio of all output ports 121
- The following tables show the possible values for the mute command 121
- The formula for the mute command is as follows 121
- The group can be skipped and the default value normal hdmi 121
- Vm6404h 121
- Vm6809h 121
- The following table lists the available mute commands 122
- Cec command 123
- Cec o01 on enter 123
- Command output number control enter 123
- Consumer electronics control cec allows interconnected hdmi devices to communicate with and respond to the same remote control 123
- For example to enable the cec function on output port 1 type 123
- Note each command string can be separated with a space 123
- The following table lists the available cec commands 123
- The following tables show the possible values for the cec command 123
- The formula for the cec command is as follows 123
- Command output number 1 horizontal resolution number 2 vertical resolution number 3 frequency number 4 control enter 124
- For example to turn scaling off for output port 02 type 124
- Scaling command 124
- Scaling o native enter 124
- Scaling o02 off enter 124
- Scaling o04 1080p enter 124
- The following tables show the possible values for the scaling command 124
- The formula for the scaling command is as follows 124
- The scaling command allows you to set a resolution for scaling the display connected to an output port 124
- To set the scaling for all output ports to the connected display s native resolution type 124
- To set the scaling for output port 04 to 1920x1080 60hz type 124
- Note 1 each command string can be separated with a space 125
- The following table lists the available scaling commands 125
- The port number command string can be skipped and the default 125
- Value will be used 125
- Command control enter 128
- For example to enable the frame synchronization function type 128
- Framesync command 128
- Frsync on enter 128
- Note each command string can be separated with a space 128
- The following table lists the available framesync commands 128
- The following tables show the possible values for the framesync command 128
- The formula for the scaling command is as follows 128
- The framesync command allows you enable or disable the frame synchronization function for vm6809h 128
- Command control enter 129
- Fan low enter 129
- Fan speed command 129
- For example to set the fan to low speed type 129
- Note each command string can be separated with a space 129
- The fan speed command allows you to set the internal fan speed that cools the vm6404h vm6809h 129
- The following table lists the available fan speed commands 129
- The following tables show the possible values for the fan speed command 129
- To set the fan speed use the following command 129
- Command control enter 130
- Echo command 130
- Echo on enter 130
- For example to enable the echo feature type 130
- Note each command string can be separated with a space 130
- The echo function updates the rs 232 controller when operations are made via the front panel pushbuttons web browser or telnet the changes echo back to the rs 232 controller to keep the settings in sync with the device 130
- The following table lists the available echo commands 130
- The following tables show the possible values for the echo comman 130
- The formula for the echo command is as follows 130
- Black screen command 131
- Blackscreen on enter 131
- Command control enter 131
- For example to enable the black screen function type 131
- Note each command string can be separated with a space 131
- The black screen command turns a display screen black when no source signal is detected this prevents the display from showing the default blue or other color used when no source signal is detected 131
- The following table lists the available black screen commands 131
- The following tables show the possible values for the black screen comman 131
- The formula for the black screen command is as follows 131
- Read command 132
- Reset command 132
- Baud 38400 enter 133
- Baud rate command 133
- Command control enter 133
- For example to set 38400 as the baud rate type 133
- Note each command string can be separated with a space 133
- The baud rate command allows you to set the rs 232 data rate for the vm6404h vm6809h to use options are 9600 19200 default 38400 and 115200 133
- The following table lists the available baud rate commands 133
- The following tables show the possible values for the baud rate command 133
- The formula for the baud rate command is as follows 133
- Command profile number control enter 134
- For example to save the current connection configuration to profile 02 type 134
- Note each command string can be separated with a space 134
- Profile f 02 save enter 134
- Save load profile command 134
- The following table lists the available save load profile commands 134
- The following tables show the possible values for the save load profile commands 134
- The formula for the save load profile command is as follows 134
- The save load profile command allows you to save and load connection profiles saving profiles will save the connections currently in use 134
- Command output number control enter 135
- For example to disable the osd for all outputs type 135
- For example to enable the osd for output 04 type 135
- Note each command string should be separated with a space 135
- Osd command 135
- Osd o off enter 135
- Osd o04 on enter 135
- The following table lists the available osd commands 135
- The following tables show the possible values for the osd command 135
- To enable or disable the on screen display osd for displays use the following command 135
- Alert command 136
- Alert i01 m1 enter 136
- Command input number control enter 136
- For example to enable the basic alert function for input port 1 type 136
- Note each command string can be separated with a space 136
- The following table lists the available alert commands 136
- The following tables show the possible values for the alert command 136
- To trigger a warning when issues arise for a specific input port use the following command 136
- Command speed value enter 137
- Fan high enter 137
- Fan speed command 137
- For example to set the fans to operate at high speed type 137
- Note each command string can be separated with a space 137
- The following table lists the available fan speed commands 137
- The following tables show the possible values for the fan speed command 137
- To setup fan speed use the following command 137
- This page intentionally left blank 138
- Appendix 139
- General 139
- Safety instructions 139
- Rack mounting 141
- International 142
- North america 142
- Technical support 142
- Specifications 143
- Configuration menu 145
- H call up the command list for help 145
- Ip set network settings 145
- Telnet operation 145
- Lo load connections from profile 146
- Pw change password 146
- Ri read what input is connected to nn output 147
- Ro read what output is connected to nn input 147
- Sb set serial port baud rate 147
- Ss switch input to specified output 147
- Sv save the current connections into a profile 147
- Ti set timeout 147
- Vr software version information 147
- Aten standard warranty policy 148
- Limited hardware warranty 148
Похожие устройства
- Aten VM51616H Руководство к видеоматрице
- Aten VM51616H Руководство к приложению контроля видеоматрицы
- Aten VM51616H Руководство пользователя
- Aten VM3250 Руководство пользователя
- Aten VM3250 Руководство к видеоматрице
- Aten VM3250 Краткое руководство по установке
- Aten VM3250 Руководство к приложению для контроля видеоматрицы
- Aten VM7824 Краткое руководство по установке
- Aten VM8824 Краткое руководство по установке
- Aten VM7584 Краткое руководство по установке
- Aten VM8584 Краткое руководство по установке
- Aten VM7904 Краткое руководство по установке
- Aten VM7814 Краткое руководство по установке
- Aten VM8814 Краткое руководство по установке
- Aten VM1600A Краткое руководство по установке
- Aten VM1600A Руководство к видеоматрице
- Aten VM1600A Руководство к приложению для видеоматрице
- Aten VM1600A Руководство пользователя
- Aten VM3200 Руководство к видеоматрице
- Aten VM3200 Краткое руководство по установке