SNR S2989G-48TX-RPS [272/553] Multicast vlan examples

Превью страниц Страница 272 / 553

S2989G-24TX Operation Manual

Chapter 5 Multicast Protocol Related Configuration

4-47

the multicast VLAN.

ip igmp snooping

no ip igmp snooping

Enable the IGMP Snooping function. The

no form of this command disables the IGMP

snooping function.

3. Configure the MLD Snooping

ipv6 mld snooping vlan <vlan-id>

no ipv6 mld snooping vlan <vlan-id>

Enable MLD Snooping on multicast VLAN;

the no form of this command disables MLD

Snooping on multicast VLAN.

ipv6 mld snooping

no ipv6 mld snooping

Enable the MLD Snooping function. The no

form of this command disables the MLD

snooping function.

5.5.3

Multicast VLAN Examples

Figure 5-6 Function configuration of the Multicast VLAN

As shown in the figure, the multicast server is connected to the layer 3 switch switchA

through port 1/0/1 which belongs to the VLAN10 of the switch. The layer 3 switch switchA

is connected with layer 2 switches through the port1/0/10, which configured as trunk port.

On the switchB the VLAN100 is configured set to contain port1/0/15, and VLAN101 to

contain port1/0/20. PC1 and PC2 are respectively connected to port 1/0/15 and1/0/20.

The switchB is connected with the switchA through port1/0/10, which configured as trunk

port. VLAN 20 is a multicast VLAN. By configuring multicast vlan, the PC1 and PC2 will

receives the multicast data from the multicast VLAN.

Following configuration is based on the IP address of the switch has been configured

and all the equipment are connected correctly.

Configuration procedure

SwitchA#config

SwitchA(config)#vlan 10