SNR S2989G-48TX-RPS — настройка и диагностика сетевых политик для портов [456/553]

Превью страниц Страница 456 / 553

S2989G-24TX Operation Manual

Chapter 8 Debugging and Diagnosis Configuration

8-9

drop

no drop

transmit

no transmit

Choose dropping or transmitting for the

classified flow. The no command cancels it.

4. Apply to the port

Command

Explanation

Port Configuration Mode

service-policy output <policy-map

name>

no service-policy output

<policy-map-name>

Apply a policy map to the egress of the port.

The no command deletes the policy map.

8.4.3

COPP Configuration Examples

PC1:192.168.1.1

mac:00-00-11-22-33-43

PC2:192.168.2.1

mac:00-00-11-22-33-44

Vlan1:192.168.1.3

Switch-3

Vlan2:192.168.2.3

Vlan1:192.168.1.1

Vlan2:192.168.2.1

ethernet1/0/1

Vlan2:192.168.2.2

Switch-1

Figure 8-1 COPP function

Switch-2

Example 1: Configure the COPP policy map on ethernet1/0/1 of Switch-1, limit the

packets in 192.168.1.0 as 10pps, and configure the burst threshold as 20pps. Drop all the

packets whose bandwidth exceeds the value.

Configuration steps:

Switch#config

Switch(config)#access-list 1 permit 192.168.1.0 0.0.0.255