SNR S2989G-48TX-RPS — настройка ERPS и MSTP для надежной сети [438/553]
Макгруп McGrp.ru

SNR S2989G-48TX-RPS — настройка ERPS и MSTP для надежной сети [438/553]

Превью страниц Страница 438 / 553
SNR S2989G-48TX-RPS [438/553] Erps configuration
S2989G-24TX Operation Manual
Chapter 7 Reliability Configuration
7-39
network to deal with the business at the same time. The convergence loop runs
ERPS protocol and provides layer2 redundancy protection exchange function of
convergence loop.
7.5.2
ERPS Configuration
ERPS Configuration task list as below:
1) Create the instance; the map is corresponding to the vlan which should be
protected
2) Create ERPS loop, and configure the member port information. The default
configuration: support version V2, the main loop closing type and monitor the physical
status of port
3) Configure ERPS loop instance and configure the protection instance, port roles.
Configure the ERPS loop instance name, R-APS level, timer information. Configure
the controlling VLAN at last and select the port to configure it as RPL owner and RPL
Neighbor
1. Create the MSTP instance
2. Create ERPS ring and configure the member ports information
Command
Explanation
Global Mode
spanning-tree mst configuration
no spanning-tree mst configuration
Enter into the MST configuration
mode, configure the parameters of
MSTP domain; the no command
recovers to be the default.
MST Mode
instance <instance value > vlan
<vlan-list>
no instance [instance-value]
Configure vlan which needs to be
protected by the instance and
mapping; the no command deletes the
appointed instance.
Command
Explanation
Global Mode
erps ring <ring-name>
no erps ring <ring-name>
Create ERPS ring and enter into the
ERPS ring configuration mode; the no
command deletes the appointed erps
ring.
Port Mode
erps-ring <ring-name> port0
Configure the port0 or port1 which is

Содержание

666

Похожие устройства

Узнайте, как настроить ERPS и MSTP для обеспечения надежности сети. Пошаговое руководство по созданию инстансов и конфигурации портов.